How to Fix a Broken Button on Your Jeans

Identify the Problem Area

Identify the Problem Area

Jeans are a staple item in everyone’s wardrobe and are usually our go-to choice for a laid-back, casual look. However, one of the most common problems that we face while wearing jeans is a broken button. The button can fall off or become loose due to wear and tear, leading to an uncomfortable and awkward situation, especially if it happens while we are out in public. But don’t worry, fixing a broken button on your jeans is an easy task, and we are here to guide you through the process.

The first step in fixing a broken button on your jeans is to identify the problem area. Usually, the waistband area is the most common area where the button falls off, so start by examining the waistband of your jeans. Check the button and see if it’s just loose or if it has completely fallen off.

If the button is loose, try tightening it by pushing it back and forth while holding it in place. If this doesn’t work, you may need to sew it back onto the jeans. If the button has fallen off, the first thing you need to do is find the missing button. Look for it in the surrounding area or check the inside pockets of your jeans. If you can’t find the button, don’t worry, you can always use a replacement button.

Once you have identified the problem area and have the button in hand, it’s time to get started on fixing it. You will need a few items to fix the button, including a needle, thread, and a replacement button if needed. Choose a thread that matches the color of the existing threads on your jeans and make sure the needle is small enough to fit through the button’s holes.

Before you begin, it’s a good idea to remove any leftover thread from the button. Once you have cleaned the area, take the needle and thread, and push the needle through the wrong side of the fabric where the button fell off. Pull the thread through and tie a knot on the backside of the fabric to secure it in place. If you are using a replacement button, thread it onto the needle and push it through the fabric and the existing holes on where the old button was. Repeat this process a few times for added security.

After you’ve sewn the button onto your jeans and are happy with the placement and security of it, it’s time to tie off the thread. Make sure the thread is tight and cut off the excess thread, leaving a small tail. Tie a knot at the end of the thread, and your jeans are now fully repaired!

Identifying the problem area is the first and most important step in fixing a broken button on your jeans. Whether the button is loose or has completely fallen off, examining the waistband area is the best place to start. Once you have located the problem area, it’s time to begin the process of making your jeans as good as new!

Gather necessary tools and materials

Tools and Materials

One of the most common problems we all encounter is when a button on a jeans gets broken. It can be frustrating to find that your favorite pair of jeans are unwearable just because of a small button. Don’t despair! It is an easy fix that you can do in a few steps. The first step to fixing a broken button on jeans is to gather the necessary tools and materials.


  • Sewing needle
  • Thread
  • Scissors


  • A replacement button
  • A buttonhole cutter

A sewing needle, scissors, and threads are probably already in your sewing kit, but if you don’t, they should be easy to find at a fabric store or online. For a replacement button, you can either buy one from a fabric shop or reuse a button from another item of clothing. When choosing your button, make sure it matches the size and color of the original button. You will also need a buttonhole cutter to create a hole that is the same size as the other buttonholes in your jeans.

If you are reusing a button from another item of clothing, make sure to remove it carefully, so you don’t damage the fabric. A buttonhole cutter is a handy tool that cuts a hole the perfect size for your replacement button without damaging the fabric. Alternatively, you could use scissors to open up the hole.

Once you have all the tools and materials, it’s time to get started.

  • Step 1: Find the Button

The first step is to locate the button that needs to be replaced. Make sure there are no loose threads or fabric around the area. It should be clean and smooth, making it easier to stitch the new button.

  • Step 2: Remove the Button

Use the scissors or seam ripper to cut the threads holding the button in place. Be careful not to damage the surrounding fabric.

  • Step 3: Attach the New Button

Thread the needle and tie a knot at the end of the thread. Position the new button on the outside of the jeans, where the old one was. Begin sewing the button, crossing over the holes several times to make sure it is secure. Tie off the thread on the backside of the jeans, and you’re done!

Remember to make sure that the new button is aligned with the previous ones. Sew it tightly and securely so that it won’t fall off again. Once you have sewn the button securely, you can cut off the excess thread and admire your handy work!

By following these simple steps, you can easily replace a broken button on your jeans. It’s a quick and easy fix that doesn’t require any special skills or tools. With a little practice, you will be able to replace buttons like a pro, saving countless pairs of jeans from the bin.

Remove the old button

remove old button on jeans

If you have a pair of jeans with a broken button, you can save yourself the trouble of buying a new one by fixing it yourself. The first step in this process is to remove the old button. It’s important to do this carefully to prevent any further damage to the jeans. Here’s how:

  1. Locate the button on your jeans and the metal prongs on the back of it. If the button has fallen off, you may need to use a seam ripper or a pair of scissors to remove any remaining threads.
  2. Place a cloth or towel on a flat surface, then lay the jeans face down on top of it. This will protect the jeans from any damage as you work.
  3. Using pliers, gently but firmly grip the metal prongs on the back of the button and wiggle them back and forth until they come free from the fabric. You may need to apply a bit of pressure, but be careful not to tear the fabric.
  4. Once both prongs have been removed, you should be able to easily pull the button free from the front of the jeans.
  5. Before you discard the old button, make sure to take note of its size and shape. This will help you select the right replacement button later on.

With the old button removed, you’re now ready to move on to the next step: selecting and attaching a new button.

Attach the new button

Attaching a new button on jeans

Now that you have removed the old button, it’s time to attach the new one. Here’s how you can do it in a few simple steps:

Step 1: Choose the Right Button

The first thing you need to do is select a new button that matches the size and color of the other buttons on your jeans. Take a look at the other buttons and see if you can find a match. If you can’t find an exact match, try to choose a button that is a similar color and size.

Step 2: Thread Your Needle

Next, you will need to thread your needle. Use a thread that matches the color of your jeans so that it blends in. Tie a knot at the end of the thread so that it doesn’t slip through the buttonhole. Pull the thread through the needle until it is halfway down the length of the thread.

Step 3: Start Sewing

Hold the button in place on the jeans and push the needle up through one of the holes in the button. Make sure that the knot at the end of the thread is on the underside of the jeans. Push the needle back down through another hole in the button and through the fabric of the jeans. Repeat this process four or five times to secure the button in place.

Step 4: Secure the Thread

Once you have sewn the button in place, tie off the thread on the underside of the jeans. Cut any excess thread so that it doesn’t get tangled or caught on anything. Test the button by pushing it to make sure it is secured tightly and won’t come off easily. You have successfully attached a new button!

Tip: If you are having trouble lining up the button with the other buttons on your jeans, try using a ruler or a straight edge to mark the spot where you want the button to go.

As you can see, attaching a new button to your jeans is not as difficult as it might seem. With a little patience and the right tools, you can fix a broken button and have your favorite pair of jeans back in action in no time. Just remember to take your time and be careful when threading the needle, and you’ll have a new button securely attached in minutes.

Reinforce the new button

Reinforce the new button on jeans

After attaching a new button, it is important to reinforce it to prevent it from falling off again. There are several ways to do this, and you can choose the one that works best for you.

Method 1: Use Sewing Thread: Sewing thread can be an effective way to reinforce the new button. Thread a needle with strong sewing thread and tie a knot at the end. Insert the needle through the wrong side of the fabric, passing it through the shank of the button. Make several stitches around the shank, looping them through the shank and fabric to anchor the button firmly. Finish by tying off the thread and trimming any excess.

Method 2: Use a Small Piece of Fabric: Another way to reinforce the new button is to use a small piece of fabric. Cut a small square of fabric and place it behind the button. Sew the button and the fabric patch to the jeans simultaneously, making several stitches around the shank to anchor them firmly. You can use any fabric that is thick and durable enough to withstand the stresses of everyday wear.

Method 3: Use Superglue: Superglue can provide an immediate fix if you need to reinforce the button quickly. Apply a small amount of superglue to the shank of the button, placing it firmly onto the jeans. Be sure to hold the button in place for a few seconds to give the glue time to dry and set. Superglue is a temporary solution, though, and may not hold up well in the long run.

Method 4: Use a Button Cover: A button cover is a small, plastic or metal disk that is designed to cover and protect buttons. You can purchase button covers at any sewing or craft store. Attach the button cover to the jeans using the instructions provided, placing it over the new button to protect and reinforce it. Button covers are an excellent choice if you want to add a decorative touch to your jeans while reinforcing the button at the same time.

Method 5: Use a Hammer-On Rivet:A hammer-on rivet is a small metal fastener that is hammered onto the fabric to reinforce it. It is an ideal solution for jeans with thick fabric that cannot be sewn easily. To use a hammer-on rivet, punch the buttonhole to make it slightly larger than the shank of the button. Insert the button through the hole, and place the hammer-on rivet onto the shank. With a hammer or mallet, firmly hit the rivet to secure it onto the button. The rivet will provide a strong, durable reinforcement that will last for a long time.

Using one or more of these methods to reinforce the new button on your jeans will help prolong their life and give you peace of mind. Don’t hesitate to experiment with different techniques until you find the one that works best for your needs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top