Understanding the Cause of Burnt Alto Pods
The Alto Pod is a popular e-cigarette device that has gained a significant following among both new and experienced vapers. The Pod is responsible for the heating of the e-liquid and producing vaporous essence for inhalation. For a device that performs such a crucial function, it is no surprise that it may sometimes experience problems. One of the most common issues vapers encounter is the burning of the Alto Pod. This occurrence can be attributed to various reasons, which are outlined below:
Contents
1. Dry Hits
A dry hit happens when the wick inside the Pod is inadequate, and there is insufficient e-liquid to soak it before drawing the vapor. Instead of producing vapor, the dry wick gets burnt by the heating element. Some vapers are susceptible to dry hits because they puff excessively on their Pods or draw too hard. Others may experience this problem because they use e-liquids that have high concentrations of vegetable glycerin or propylene glycol, which can cause the vapor to be thicker and harder to extract.
The fix for a dry hit is quite apparent. One would only need to ensure that there is an adequate supply of e-liquid in the Pod. One could also leave the Pod to soak for a short while to allow the wick to absorb enough e-liquid. Another option is to draw slower and gentler to prevent the coil from burning out.
2. Overheating
Overheating happens when the heating element inside the Alto Pod burns hotter than it usually should. This occurrence can cause damage to either the wick, the coil, or both. Overheating can happen due to a variety of reasons. One common cause of overheating in Pods is when they are used continuously for long periods, causing them to become excessively hot to the touch. Another possibility is when the device is left in direct sunlight or heat or laid down on something that retains heat, like a pillow or a cushion.
When the Pod overheats, vaping may no longer be possible, and the coil’s resistance changes, which can lead to other problems. To prevent this from happening, vapers should avoid using their device for long periods and leave it to cool down regularly. Additionally, storing the device in a cool, dry place can reduce the chances of overheating.
3. Chain Vaping
Chain vaping means drawing on the Alto Pod continuously without any breaks. Chain vaping is tempting, especially while on a break or after a hectic day, but it increases the chances of overheating or even getting burnt Altos. The constant heat causes the Pod to become hotter than usual, burning the coil’s wick and eventually damaging the device. Chain vapers who use high resistance coils are more likely to experience burnt hits than others.
The solution to chain vaping is to take breaks between puffs to allow the Pod to cool down. Additionally, reducing the frequency of use and lowering the resistance of the coil can also help prevent burnt hits.
In conclusion, understanding the different causes of burnt Alto Pods is crucial in preventing these e-cigarette devices from burning out prematurely. Dry hits, overheating, and chain vaping are the most common reasons for burnt hits, and vapers should take appropriate measures to prevent them as outlined above. By following these simple tips, vapers can ensure their Alto Pods provide the smoothest and most enjoyable vaping experience for a more extended period.
Cleaning the Burnt Pod to Remove Residue
If your Alto pod has been overheated, burnt flavors can get trapped in the device and continue to affect every hit you take. There are times when you might forget to check if your pod is running low or you might overuse it, and that’s when you know that you need to clean it. Cleaning your burnt pod is not that complicated, and it can easily be achieved with a few household items. Here are some steps on how to clean your burnt pod and remove the residue:
Items Needed:
- Isopropyl or rubbing alcohol (70% or 90%)
- Cotton swabs or Q-tips
- Paper towels
- A small container or a plastic bag
Instructions:
1. First, you need to remove the burnt pod from your Alto device, and carefully take off the mouthpiece.
2. Then, use the paper towel to clean the exterior of the pod to remove any dust, debris, or other substances. The pod needs to be clean before the interior is accessed.
3. Take the empty container or plastic bag and pour some isopropyl or rubbing alcohol into it. Make sure the pod can be fully submerged in the alcohol, and allow the pod to soak for 30 minutes.
4. Use cotton swabs or Q-tips soaked in isopropyl or rubbing alcohol and gently clean the inside of the pod. The swabs should be slightly damp (not dripping) as too much liquid can damage the electronic parts.
5. Continue to clean the inside of the pod until the cotton tip comes back clean.
6. Use a paper towel to dry the pod. Place it on a flat surface for 10 to 15 minutes or until it is completely dry. To speed up the drying process, you can use a hairdryer. Just make sure it’s on low and that it’s not too close to the pod because too much heat can cause damage.
7. Once your pod is dry, reassemble your Alto pod and begin vaping again.
Conclusion:
It’s important to remember that cleaning your Alto pod is essential to maintain the quality of your vaping experience and the device’s longevity. With some household items and a few minutes of your time, you can have a clean, fresh pod that delivers the flavor you love. After cleaning the pod, do a “dry burn” by attaching the cartridge to the battery without inhaling. This will remove any residual alcohol, and you’ll notice a significant improvement in the flavor. But be sure not to dry burn for too long as this can harm the coils. So, follow these instructions and get that burnt flavor out of your Alto pod for good!
Priming a New Pod for Use
If you are trying to fix a burnt Alto pod, it is a sign that you might need to prime a new pod for use. Priming a new pod is the process of getting it ready for vaping. It is essential to prime a new pod before taking your first drag because it helps to prevent the coil from getting burnt. When a coil gets burnt, you may experience an unpleasant taste, and it may also cause damage to your Pod. Here are the steps to prime a new Alto pod for use:
Clean Your Hands
The first step in priming a new pod is to clean your hands. Clean hands ensure that the pod is free from any dirt or oils that may interfere with the performance of the pod. Dirty hands can lead to a damaged pod, and you will not get the most out of your vaping experience. Wash your hands properly with soap and water, or use an alcohol-based hand sanitizer.
Remove the Pod from Its Packaging
The next step is to remove the pod from its packaging. Gently tear the packaging, and take the pod out. Be careful not to damage the pod or the packaging. Once you have removed the pod, check for any signs of damage. If there are any cracks or damage to the pod, do not use it, and contact the manufacturer for assistance.
Fill the Pod with E-liquid
The next step is to fill the pod with your favorite e-liquid. Before you fill the pod, make sure that the e-liquid is compatible with the Alto pod. You can check the instruction manual or read the packaging label to confirm compatibility. After confirming compatibility, remove the rubber stopper from the pod and fill it with e-liquid. Avoid filling it to the brim as this may cause e-juice leakage.
Let the Pod Sit
After filling the pod with e-liquid, let it sit for at least ten minutes. Giving the pod time to sit allows the e-juice to soak into the wick, which primes the coil. Skipping this step may lead to a burnt pod. A burnt pod can be frustrating to use, and you may need to replace it with a new one.
Test the Pod
Once you have allowed the pod to sit for the recommended time, you can test it to ensure that it is working correctly. Attach the pod to the Alto device and take your first drag. If the coil is well primed, you should get a smooth flavorful hit without any problem. If you experience any issues, try troubleshooting, but if this doesn’t help, consider replacing the pod.
Priming a new Alto pod for use is crucial for having a smooth vaping experience. If you don’t prime the pod, it may result in a burnt taste and possibly cause damage to your Alto Pod. Follow the steps outlined here, and you’ll be up and vaping in no time!
Adjusting Wattage and Airflow Settings to Prevent Burning
While the Alto Pod is a revolutionary vaping device, it can also be frustrating to deal with when burnt. Luckily, there are some adjustments you can make that will help prevent burning from happening in the first place. Here are some tips for adjusting your wattage and airflow settings:
1. Start with the Lowest Wattage Setting
One of the most common reasons why Alto Pods get burnt is because of the high wattage setting. When the wattage is too high, the coil gets too hot, which can cause it to burn out. Thus, it’s important to start with the lowest wattage setting and gradually increase it if necessary. If you find that the vapor is too weak, then gradually increase the wattage until you find the sweet spot.
2. Adjust the Airflow to Optimize Vapor Quality
Aside from the wattage, another factor that can affect the quality of your vapor is the airflow. When the airflow is too tight, the vapor can be too harsh and uncomfortable to inhale. On the other hand, when the airflow is too loose, the vapor can be too thin and weak. Therefore, to optimize your vapor quality, you should adjust the airflow to your preference. Start by closing the airflow till it is almost shut then inhale slightly. Then, gradually open the airflow until you get the perfect balance between vapor density and flavor intensity.
3. Experiment with Different Coil Types
Another way to prevent burnt Alto Pods is by experimenting with different coil types. Different coil types have different resistance and require different wattage settings. Therefore, finding the right coil head for your preferences is important. Try different coils until you find the one that provides the optimal flavor and vapor output. This will help prevent burning the coils and ensure longer-lasting pods.
4. Prime Your Coils Before Use
Primers help lubricate and prepare your coils before initial and subsequent uses. Priming a coil involves saturating it with e-liquid before use, but ensure not to over-saturate it with e-liquid. The easiest way to prime a coil is to add few drops of your e-liquid to the cotton on the edge of the coil and leave it for 5-10 minutes before using it to prevent burning. This will help ensure that your coils are ready for use from the first puff and reduce the chances of coil burnouts.
Overall, if you follow these tips for adjusting your wattage and airflow settings and prime your coils before use, you can help prevent your Alto Pod from burning and prolong its lifespan. Enjoy your vaping experience to the max by implementing these tips to make the most out of your Alto pod device!
Replacing the Burnt Pod with a New One
If your Alto Pod has burnt, you might be wondering what next to do. Fortunately, replacing a burnt pod is easy, and you don’t have to buy a whole new device. However, before undertaking this task, ensure that you have a replacement pod ready. Here are the steps to follow:
- Remove the old pod. Turn your Alto Pod upside down to reveal its pod. The pod is the component that holds the vaping liquid and is placed in the device’s slot. Press firmly and carefully to ensure that the burnt pod is removed completely from the slot. If the pod is slightly sticky, hold it under warm running water to loosen it up. Avoid using excessive force as this can damage the device.
- Prepare the new pod. Once you have removed the burnt pod, prepare the new one to replace it. The pod’s protective cover should be removed, and any excess fluid should be wiped away with a clean tissue.
- Check the pod’s priming. Before placing the new pod in the device, it’s essential to check its priming. Priming is an essential step in preparing the pod. It ensures that the pod is saturated with liquid and ready to vape. To prime the pod, place it on your tissue and allow a few drops of the vaping liquid to seep into the pod via the wick holes. Observe if the liquid has covered the entire wick. If not, add more vaping liquid and repeat the process until the wick is fully saturated.
- Place the new pod in the device. After priming the pod, place it in the slot. Ensure it fits snugly in the device’s slot. You will hear a clicking sound indicating that the pod has been correctly installed.
- Puff and wait. Once the pod is in place, you can proceed to puff and wait. Wait for at least five minutes before resuming vaping to allow the wick to absorb the vaping liquid fully. This waiting time enables the vape coil to soak up the e-juice. The result will be a smooth, deliciously flavored vaping experience.
Replacing a burnt pod with a new one is easy, and you don’t have to buy a whole new device. The steps are straightforward, and it won’t take much of your time. It is recommended that you use genuine Alto Pod replacements to avoid compromising the device’s efficiency and overall vaping experience