Troubleshooting Common Causes
If you’ve got cordless cellular shades that won’t go up, you’re probably wondering what’s causing the problem. As it turns out, there are a few common reasons why this might be happening – and by understanding these causes, you can take steps to fix the issue and get your shades working properly again. Below, we’ve outlined some of the most common causes of cordless shades that won’t go up – and what you can do to fix them.
The first thing to check when your cordless shades won’t go up is the tension of the internal springs that control the shade’s movement. Over time, these springs can become worn or lose their tension, making it difficult or impossible for the shade to move up and down as intended. To check the tension of your springs, start by lowering your shade all the way down to its fully extended position. Then, gently tug on the bottom edge of the shade and release it. If the shade springs back up into position quickly, it’s properly tensioned. However, if the shade doesn’t spring back up or moves very slowly, the springs likely need to be replaced.
If you do find that your springs are worn or need to be replaced, you may be able to do the job yourself with a spring replacement kit (which should include instructions). Alternatively, you may need to contact a professional to handle the task for you. In either case, replacing the springs should solve the issue of cordless cellular shades that won’t go up.
Another common issue that can cause cordless shades to stop moving is a buildup of dirt, dust, or other debris in the internal mechanics of the shade. Over time, dirt and debris can accumulate on the gears and other moving parts of the shade, making it more difficult for them to move freely. To fix this problem, you’ll first need to raise the shade to its highest position, then remove it from its brackets. Next, use a soft-bristled brush or a vacuum attachment to gently sweep away any dirt or debris from the internal mechanics of the shade. Once you’ve done this, reattach the shade to its brackets and test it out to see if it moves more smoothly.
Another potential cause of cordless shades that won’t go up is a dirty or damaged shade track. The track is the channel through which the shade moves up and down, and if it becomes dirty or damaged, it can make it difficult for the shade to move smoothly. To check for this issue, examine the shade track carefully to see if it appears dirty or damaged in any way. If it does, use a soft cloth to clean the track or contact a professional to repair it.
Finally, if you’ve checked all of these potential causes and your cordless shades still won’t go up, it’s possible that there’s a problem with the lift mechanism itself. This can be caused by a malfunctioning motor, a faulty battery, or another internal issue with the shade. If this is the case, you’ll likely need to contact a professional to diagnose and repair the problem.
Overall, there are several potential reasons why your cordless cellular shades might not be going up – but by understanding these common causes and taking steps to address them, you should be able to get your shades working properly again in no time.
Checking the Spring Tension
If your cordless cellular shades won’t go up, there is a good chance that the spring tension is not working correctly. The spring tension is an essential part of the shade’s mechanism, responsible for keeping the shade in place and also for allowing the shade to move up and down smoothly. If the spring tension is not working, the shade will not go up. Here are some steps you can take to check the spring tension:
Contents
1. Locate the Spring
Start by locating the spring inside the headrail. To do this, remove the shade from the window. Then, look inside the headrail to find the spring. The spring is usually located on one side of the headrail, and it looks like a coiled-up piece of metal.
2. Check the Spring Tension
Once you have located the spring, you need to check the tension by pulling on the tab located on the end of the spring. The tab is usually a small plastic piece that sticks out of the spring. Pull the tab down gently and then release it. The spring should retract quickly and smoothly. If it doesn’t, the spring tension is probably too loose or too tight.
If the spring tension is too loose, the shade will not stay in place, and it will slide down slowly. If it is too tight, the shade will be difficult to pull down and will move jerkily. You can adjust the spring tension by moving the tabs on the end of the spring up or down. Move the tab up to increase tension and down to decrease it.
It is important to make small adjustments and check the tension again because if you move the tab too far, you might damage the spring or make the tension too tight.
3. Reinstall the Shade
Once you have adjusted the spring tension to the correct level, reinstall the shade back in the window. Pull the shade down and test it to see if it goes up smoothly. If it doesn’t, you might need to adjust the spring tension again until the shade moves up and down without any problems.
4. Seek Professional Help
If you have followed these steps and the shade still won’t go up, it might indicate a more serious problem with the mechanism or the shade’s fabric. In that case, it is best to seek the help of a professional who can diagnose and fix the problem.
Fixing cordless cellular shades that won’t go up can be a frustrating experience, but by checking the spring tension, you can identify and solve the problem quickly and easily. Remember to take your time and make small adjustments when moving the tabs to avoid damaging the spring. If you are unsure or uncomfortable about adjusting the spring tension, seek the help of a professional to avoid further damage.
Adjusting the Lift Strings
If your cordless cellular shades won’t go up, adjusting the lift strings might be the solution. When you pull the lift strings, the bottom rail should move up and down smoothly. But if the shade is stuck, it may be due to a problem with the lift string’s tension. Here’s how you can adjust the lift strings of your cordless cellular shades:
Step 1: Determine Which Lift String Needs Adjustment
If your shade has two lift strings, you’ll need to identify which one needs adjusting. Pull each string separately and observe which one is not lifting the shade. This string is the one you need to adjust.
Step 2: Locate the Tension Device
Your cordless cellular shade has a tension device located inside the headrail. This device controls the tension of the lift strings. You’ll need to locate this device so you can adjust it. Look for a small white wheel or ratchet on the side of the headrail. This is the tension device.
Step 3: Adjust the Tension Device
To adjust the tension device, use a flathead screwdriver to turn the wheel or ratchet clockwise if you need to increase the tension, or counterclockwise if you need to decrease it. Turn the wheel a quarter turn at a time and test the lift string until the shade lifts and lowers smoothly. If you need to adjust the other lift string, repeat the process on the other side of the headrail.
It’s essential to make small adjustments to avoid over-tightening the lift strings. If you over-tighten the string, it can cause the shade to be difficult to lift or may even damage the shade.
Adjusting the lift strings is a DIY fix that’s simple to do but requires attention to detail. If you cannot get the lift strings to work properly, it may be time to consider contacting a professional for assistance.
Replacing the Motor or Control System
Cordless cellular shades provide convenience and flexibility with their motorized and automated systems. However, just like any other device, these shades may malfunction and prevent you from lifting or lowering them. One possible cause of this problem is a faulty motor or control system. In this article, we will guide you on how to fix cordless cellular shades that won’t go up by replacing the motor or control system.
Before you start the replacement process, ensure that you have the right tools and equipment. You may need a screwdriver, pliers, wire cutters, and a new motor or control system. Depending on your shade’s model and type of motor, you may need to order a replacement part from the manufacturer.
1. Remove the shade from the window: It would be best to remove the shade from the window to get better access to the motor and control system. Lower the shade to its full length and unclip it from its brackets. You will need to detach the shade from its headrail, so make sure you have someone to help you hold it while removing it.
2. Remove the cover and wiring: Use a screwdriver to unscrew the cover of the headrail. Locate the motor and control system and carefully remove the wiring that connects them to the other components of the shade. Depending on your shade’s model, you may need to cut and strip the wire or unplug the connector.
3. Remove the old motor or control system: Once you have detached the wiring, use a plier to remove the screws or clips that hold the motor or control system in place. Be gentle when removing the part to avoid damaging surrounding components. After removing the part, check for any visible damage or wear and tear. If the part is faulty, proceed to the next step.
4. Install the new motor or control system: Depending on the type of part you purchased, follow the instructions on how to install it. Usually, the replacement part will come with a manual or guide that you can use to install it. You may need to connect wires or clips to secure the part in place. After installing it, check to ensure that it works correctly.
5. Reassemble the shade: Once you have installed the new motor or control system and tested it, you can now reattach the wiring and cover. Be sure to secure them tightly and correctly to avoid any damages. After reassembling everything, it’s time to reinstall the shade to the window. Attach the brackets to its designated place and clip the shade back into the bracket.
By following the steps above, you can fix cordless cellular shades that won’t go up by replacing the motor or control system. It’s crucial to note that replacing the motor or control system can be dangerous if not done correctly. Ensure that you have turned off the power supply and have the necessary knowledge before proceeding to avoid any injuries or damages. Additionally, if you’re unsure of what to do, seek professional help.
Seeking Professional Assistance
If you have tried all the DIY methods available and your cordless cellular shade is still not functional, it might be time to call in the professionals. While some repairs may be easy to fix on your own, others may require the skills, tools, and knowledge of a professional repair service. Here are some things to consider when seeking professional assistance for your cordless cellular shades:
Research: Before calling any repair service, research the companies available in your area. Look for reputable and experienced service providers that specialize in repairing cordless cellular shades. Read online reviews to get an idea of their track record and reputation. Do not overlook the company’s customer service, as this will indicate how responsive they are to your needs.
Ask for References: Request for references from the companies you are considering. Ask for references from past clients to determine their level of satisfaction with the service provider. A reputable company will be happy to provide references and successful projects they have completed in the past.
Get a Quote: Before hiring any service, get a written estimate for repair work to be carried out. This will help you gauge the cost of the project and allow you to compare prices from different service providers. A good company will provide you with a detailed quote that includes the cost of labor and materials. Remember, the cost should not be the only factor considered when selecting a service provider.
Ask About the Warranty: Always inquire about the warranty offered for repair work. A reputable service provider will stand behind its work with a warranty. A warranty will provide you with peace of mind knowing that the work completed is guaranteed, and if there are any issues later on, you can have the issue taken care of without extra costs.
Ask About the Repair Process: It’s always good to get an understanding of the repair process before work begins. This will help set the right expectation on the time the repair work will take, what the repair process involves, and what might need to be replaced. Ask the service provider about the repair process and any potential delays that may affect the projected completion time. This will prevent any surprises or misunderstandings during the repair process.
Remember, cordless cellular shades are an investment for your home, and repairing them should be taken seriously. Using the services of a reputable repair company will ensure that your repair needs are met efficiently and effectively, and your shades will function properly for years to come.