How to Fix Your Dyson Trigger in 5 Simple Steps

Troubleshooting common Dyson Trigger issues

Dyson Trigger

One of the most efficient and convenient hand-held vacuum cleaners on the market today is the Dyson Trigger. This small but powerful tool is designed for easy cleaning, especially for those hard-to-reach corners, spaces, and surfaces. However, like any other electronic device, the Dyson Trigger can encounter problems that can affect its performance and ultimately decrease its effectiveness over time. Below are some common Dyson Trigger issues and how to troubleshoot them.

Lack of Suction Power

Dyson Trigger Lack of Suction Power

One of the most common problems when using the Dyson Trigger is a decrease in suction power. This can occur when the dirt bin is full, and the vacuum cleaner’s filters are clogged. To fix this issue, you should first turn off your vacuum and unplug it from the power socket. Then, remove the dirt bin and empty its contents. Check the filters for any clogs or blockages, and if they appear dirty, replace them. Alternatively, clean them thoroughly with warm soapy water and let them dry completely before reinserting them into the vacuum. After this, reattach the dirt bin, and your Dyson Trigger should now have improved suction power.

If suction power is still inadequate, it may be caused by a worn-out filter, in which case the filter will need replacing. Additionally, check the hoses and nozzles to ensure that they are not obstructed. If you find any blockages or debris, remove them using a sharp object or a wire hanger. Ensure that any attachments are correctly fitted to the vacuum cleaner before resuming cleaning to improve suction power.

The Vacuum Cleaner Keeps Turning Off

Dyson Trigger Keeps Turning Off

If your Dyson Trigger keeps turning off or you are experiencing a power cut, it could be due to multiple possibilities, including overheating or weak battery power. Start by checking if the battery is fully charged and replace it if necessary. Remove and clean any obstructions or clogs on the vacuum’s filter, then allow it to cool down before resuming cleaning. If you have been running the vacuum cleaner for an extended period, you could also try allowing it to cool down for 30 minutes before restarting it. If none of these fixes work, you should contact Dyson customer support for assistance.

Noisy Operation

Dyson Trigger Noisy Operation

If your Dyson Trigger is operating noisily, it could be caused by debris or obstructions in the vacuum cleaner. First, check the hose and nozzle of the vacuum cleaner to ensure they are not blocked, and any attachments are correctly connected. You can also try cleaning the vacuum cleaner’s filter, as a blocked filter can cause the motor to work harder and increase noise levels. If the cleaning of these parts does not fix the issue, there may be a defect in the motor or other internal components, and you should contact Dyson customer support for assistance.

The Brush Roll Stops Working

Dyson Trigger Brush Roll Stops Working

If the brush roll on your Dyson Trigger is not working, it may be due to obstructions or debris stuck in the brush bar or the vacuum’s motorized floor head. First, turn off your vacuum cleaner and unplug it from the power supply. Check the brush bar and remove any hair, fibers, or debris that might be obstructing it gently using a clean toothbrush or a pair of scissors. You should also check the motorized floor head for debris or obstructions, remove them, and then check if the brush roll has been restored to its working condition. If you still experience problems with the brush roll, there could be a more serious issue with your motorized floor head, and you should contact Dyson customer support for assistance.

Disassembling the Dyson Trigger for Cleaning

Disassemble Dyson Trigger

When your Dyson trigger is not working properly, you may need to give it a little bit of TLC to get it up and running again. The best way to do this is by disassembling the Dyson trigger for cleaning. This is a simple process that you can do yourself in just a few minutes. Here are the steps you need to follow:

Step 1: Remove the Battery

The first thing you need to do is remove the battery from the Dyson trigger. Simply slide the catch, located on the back of the trigger, towards the top of the unit and lift the battery out. This will ensure that the trigger is completely turned off and that there is no power running through it while you are disassembling it.

Step 2: Remove the Filter

Next, you will need to remove the filter from the Dyson trigger. The filter is located at the top of the unit, just below the trigger. To remove it, simply twist it counterclockwise. It should then come out easily. Once you have removed the filter, take a look at it to see if it needs to be cleaned or replaced. If it is dirty, wash it thoroughly with soap and water and let it dry completely before putting it back in.

Step 3: Remove the Bin and Cyclone

The bin and cyclone are located at the bottom of the Dyson trigger. To remove them, simply press the release button on the side of the unit and slide them out. Again, take a look at these components to see if they need to be cleaned or replaced. If they are dirty, wash them thoroughly with soap and water and let them dry completely before reassembling.

Step 4: Clean the Exterior

With all of the internal components removed, you can now clean the exterior of the Dyson trigger. Use a cloth and a mild cleaning solution to wipe down the unit. Be careful not to get any water or cleaning solution on the internal components, as this could damage them.

Step 5: Reassemble

Once you have cleaned all of the components, you can begin to reassemble the Dyson trigger. Start by sliding the bin and cyclone back into place. Then, twist the filter clockwise until it locks into place. Finally, slide the battery back into the unit and lock it into place by sliding the catch towards the bottom of the trigger.

By following these simple steps, you should be able to easily disassemble your Dyson trigger for cleaning. Regular cleaning and maintenance will help to ensure that your trigger continues to work properly and lasts for years to come.

Replacing the filter in the Dyson Trigger

Replacing Dyson Trigger Filter

If you have noticed a decline in the suction power of your Dyson Trigger, you may need to swap out the filter. The filter in your Dyson vacuum cleaner plays a crucial role in trapping dust and allergens. It ensures that the air released back into the room is free of dirt and other particles. Using a faulty filter can lead to poor air quality, which can be hazardous to your health. The good news is, replacing the filter is a straightforward process that can be done at home in just a few minutes. Here’s a step-by-step guide:

Step 1: First, turn off and unplug the Dyson Trigger from the power source. This is standard safety protocol that should be followed anytime you perform maintenance on your vacuum cleaner.

Step 2: Next, remove the filter cover by pressing the release button located on the top or bottom of the cleaner head casing. On some models, you might need to tug the release tag a little to expose the filter.

Step 3: Once the filter cover is off, you can take out the filter. You should expect to see a cylindrical-shaped filter that is slightly taller than the filter cover. Simply remove it by pulling it straight out of the unit. Be careful not to accidentally knock loose any of the dust that might have accumulated on it.

Step 4: After removing the dirty filter, discard it responsibly and get your replacement filter. It’s important to use genuine Dyson filters. Using an inferior filter can lead to a drop in suction power and other issues.

Step 5: Fit the new filter into the unit. Ensure that the filter is inserted evenly and there are no gaps between the filter and the unit.

Step 6: Finally, put the cover back on the unit and push it in place. It should click when properly installed.

Step 7: Plug the unit back in and turn it on to ensure it’s functioning correctly. Check for any unusual sounds or change in suction power. If you identify any issues, repeat the process and ensure that each step is carried out properly.

It’s recommended that you clean or replace the Dyson Trigger filter every six months or when it gets visibly dirty. Replacing the filter guarantees that your vacuum cleaner functions efficiently and effectively. Doing so will ensure that the air released back into your home is fresh and clean, which is important for allergy sufferers and clean air enthusiasts.

Replacing the battery in the Dyson Trigger

Battery Replacement for Dyson Trigger

Having a cordless vacuum is convenient because you can easily carry it around wherever you want to clean. But the downside is that the battery poses limitations, and it eventually deteriorates over time, which affects the cleaning performance. Without a reliable battery, your Dyson Trigger won’t be able to carry out its primary function. If you want to make the most of your Dyson Trigger, it’s important to replace the battery occasionally. Follow these steps:

Step 1: Purchase a Compatible Battery

Before you start replacing the battery, you should ensure that you get the right model rechargeable battery for your Dyson Trigger. There are numerous types of Dyson Trigger vacuums, and each has specific battery requirements. Using a wrong battery can damage your vacuum and pose safety risks.

It’s advisable to purchase the original battery from the Dyson manufacturer. But if the cost is high, you can opt for a compatible battery from a reputable dealer. Ensure that you verify the specifications and compatibility before buying any battery. Consult your Dyson user manual to know which battery is best recommended for your vacuum model.

Step 2: Turn Off the Vacuum

Safety comes first when handling the vacuum battery. Before you start removing the battery, ensure that you switch off the vacuum and unplug it from the power source. This is a safety precaution that helps you to avoid electric shock or damage to the vacuum.

Step 3: Remove the Battery Cover

Most cordless vacuums have the battery well protected by a cover. You should remove this cover to access the battery underneath it. Take your time and inspect the vacuum carefully to avoid breaking any plastic clips or other components that may be holding the lid. Once you remove the cover, you’ll see the battery pack.

Step 4: Disconnect the Battery

The battery is usually connected to the vacuum by a clip or connector. You should carefully disconnect the battery from the clip by pressing the release button. Avoid prying the battery out forcefully, as you may damage the connector. If the battery is connected by screws, use a screwdriver to unfasten them and remove the battery.

Step 5: Install the New Battery

After removing the old battery, it’s time to install the new one. You should observe the polarity of the battery and ensure that you place it properly in its slot. Align the connector to its clip or screw it into position and ensure it’s firmly secured. After this, test the vacuum if it’s functioning properly.

Step 6: Charge Your Vacuum

After installing the new battery, you should charge it for at least four hours before using it. This helps in conditioning the battery and ensuring that it reaches its full capacity. You can connect it to the charging dock while it’s switched off or use a wall charger if it’s compatible.


Your Dyson Trigger cordless vacuum is an essential tool for keeping your home or office clean. It’s important to maintain it properly by replacing the battery occasionally. With the above five steps, you can confidently replace your Dyson Trigger battery and continue enjoying its excellent performance. But if you’re unsure about replacing the battery yourself, don’t hesitate to reach out to an expert.

Contacting Dyson customer support for additional assistance

Contacting Dyson customer support

If you have followed all the steps mentioned above and your Dyson trigger is still not working, then you may want to consider getting additional assistance from Dyson customer support. Dyson customer support team is well-equipped to help customers resolve any issues they may be facing with their dyson products. You can either contact Dyson support by phone or email.

Before you contact Dyson support, make sure you have your product’s serial number and model number handy. This information will be required by the support team to help identify your product and provide you with quick and efficient support.

Phone Support

To contact Dyson customer support by phone, you can call the Dyson helpline at 1-866-693-9766. Dyson’s customer support team is available 7 days a week from 8 am to 8 pm ET to answer any questions and assist you with any issues you may have with your Dyson trigger.

If you have already registered your product with Dyson, then you can also request a call back from the support team by logging into your Dyson account. This option allows you to select a date and time that is convenient for you to receive a call back from Dyson support.

Email Support

If you prefer to contact Dyson support by email, then you can fill out the email form available on the Dyson website. To access the email form, go to the Dyson support page and scroll down to the “Contact us” section. Here, you will have to enter your contact information, product details, and a brief description of the issue you are facing with your Dyson trigger.

Please note that email support may take longer than phone support, and the response time may vary depending on the volume of support requests received by Dyson.

Live Chat Support

If you need quick assistance and have limited time, or you don’t want to wait in queue for phone support, then live chat support is a good option. You can chat with a Dyson support representative and get your queries resolved quickly.

To access the live chat support, go to Dyson support page and click on “Chat live” located in the “Contact us” section. You will be prompted to enter your name and email address before establishing a chat connection with the support team.


In summary, if you have tried all the basic troubleshooting tips to fix your Dyson trigger and the issue still persists, don’t hesitate to contact Dyson customer support. They are always ready to assist and provide the right solutions to ensure your Dyson trigger is functioning optimally.

Their prompt response and professional approach in handling customer queries make them one of the leading customer support teams in the industry.

So, whether you need assistance in fixing your Dyson trigger or have any other queries or concerns, feel free to contact Dyson support by phone, email, or live chat, and they will be happy to help you out!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top