Understanding E11 Error Code on Electrolux Washer
If you own an Electrolux washer, then you might have encountered the E11 error code. This error code can be frustrating, and it is important to understand what it means and how to fix it.
The E11 error code means that there is a problem with the washer’s water inlet. The washer is not able to fill up with water, which can cause issues with washing your clothes. The good news is that this is a common error code, and there are several things you can do to fix it.
First, check the water supply to make sure that there is no issue with the water connection. Make sure that the water valves are fully open, and there are no kinks in the water hoses. If there is an issue with the water connection, then the washer will not be able to fill up with water, and you will see the E11 error code.
If the water supply is not the issue, then check the water filter. The water filter is connected to the water inlet valve and can sometimes become clogged with dirt and debris over time. This can prevent the water from getting into the washer, which can trigger the E11 error code. To clean the water filter, you will need to disconnect the water hoses from the washer and remove the filter. Rinse the filter with water to remove any debris, and then reconnect it to the washer.
If the E11 error code persists after checking the water supply and cleaning the water filter, then there may be an issue with the water inlet valve itself. The water inlet valve is responsible for controlling the flow of water into the washer and can sometimes malfunction. If this is the case, then you may need to replace the water inlet valve. You can contact a professional repair technician to assist you with this process.
In conclusion, the E11 error code on an Electrolux washer can be frustrating, but it is also manageable. By understanding what the error code means and troubleshooting steps, you can fix the issue and get back to washing your clothes efficiently.
Initial Troubleshooting for E11 Error on Electrolux Washer
If you own an Electrolux washer and you’re getting an E11 error code, you may be wondering what’s causing the problem and how to fix it. The E11 error indicates that the washing machine has a problem with the water level sensor. The sensor is responsible for detecting the water level in the washer and signaling when it needs to be adjusted. When the sensor malfunctions or fails, it can result in the E11 error. If you’re experiencing this error, here’s a step-by-step guide on how to troubleshoot the issue.
1. Check the Water Inlet Hoses and Water Supply
Before you inspect the water level sensor, it’s essential to check the water inlet hoses and water supply. If the inlet hoses are kinked or have a leak, the washer might not get enough water to operate. So, it’s always best to start by checking the hoses and the water supply. Turn off the water supply, disconnect the hoses from your washing machine, and check them for any kinks, clogs, or damages. If you find any issues, replace the hoses or fix the problem. Once you’ve confirmed that the water inlet hoses and water supply are working correctly, proceed to the next step.
2. Inspect the Water Level Sensor
If the water supply and the hoses are working properly, the next step is to inspect the water level sensor to ensure it’s functioning as expected. The sensor is located in the bottom of the washer, which means you’ll need to remove the back panel to access it. Before you begin, unplug the unit and shut off the water supply valve. Then, remove the back panel and locate the water level sensor. It should be a round, plastic component with a hose attached. Check the component for any visible signs of damage, like cracks or holes. If you notice any damages, you’ll need to replace the sensor. However, if the sensor appears to be in good condition, check the hose connected to it. If the hose is damaged or clogged, it can prevent the sensor from operating correctly. Remove the hose and clean it or replace it if there is any damage.
3. Test the Water Level Sensor
If the water level sensor and the hose are working correctly, the last thing to do is to test the sensor to make sure it’s functioning correctly. To do this, use a multimeter to check the resistance of the sensor. If the sensor is functioning correctly, it should have a resistance of around 20k ohms. If it’s not, you’ll need to replace the sensor. When you replace the sensor, be sure to ensure that the water level setting is set correctly. It should be set to the appropriate level, based on the size of your washer.
By following these three steps, you’ll be able to troubleshoot the E11 error code on your Electrolux washer. If you’ve checked all of these steps but still can’t find the issue, it might be time to call a professional. A washing machine repair specialist can diagnose and fix the issue, saving you time and stress in the long run. However, by troubleshooting the issue yourself, you might be able to save some time and money.
Clearing Blockages in Electrolux Washer Drain System
Most people have experienced the frustrating E11 error code on their Electrolux washer. If you are one of those people and have already gone through the regular checkpoints, such as checking the door lock or power supply, your washer might have a problem with its drain system. Here are some tips to help you clear blockages from your Electrolux washer drain system.
Before working on your washer, make sure to always turn off the power and unplug it. We also recommend using gloves to protect your hands.
Contents
Step 1 – Remove the Drain Hose
The first thing to check is the drain hose. It can get clogged up with lint, fabric, or other debris. To remove it, loosen the clamp with pliers and slide it off the drain pipe. Grab a bucket and place it under the hose to catch any water that might come out. Carefully detach the hose from the washer, and you can either run some water through it or inspect it visually to see if there is any debris obstructing it.
Step 2 – Remove the Drain Pump Filter
If the drain hose is not the issue, you need to check the filter. It is located behind the drain pump cover at the bottom of the washer. Unscrew the cover using a screwdriver or pliers and remove it. Place the bucket under the filter to catch any water that may come out. The filter is likely to have dirt, lint, paper, and other debris; remove them with a cloth or soft brush carefully. Once finished, screw the cover back into place.
Step 3 – Check the Drain Pump Impeller
If the filter is not the issue then it’s time to inspect the drain pump impeller. The impeller is responsible for pushing water out of your washing machine. If it’s jammed with lint, fabric, or other materials, the water flow will be obstructed. To check the impeller, take apart the washer and locate the pump. Use pliers or fingers to turn the impeller blades to see if they’re moving freely. If they’re not, it’s possible it needs to be replaced or simply cleaned out.
If you’re not comfortable disassembling your washing machine, it’s best to contact a qualified technician. If you tried these steps and still encounter the E11 error code, your washer might have a more complex problem that needs the attention of a professional.
Preventative Measures to Avoid Future Blockages
Prevention is always better than cure. So keep in mind some of these tips to avoid future blockages in your Electrolux washer drain system.
Use a Lint Trap
Use a lint trap in your washing machine to prevent lint and other debris from clogging your drain pipe. Make sure you dispose of it properly after each wash.
Wash Clothes Properly
Make sure you take off any loose debris from your clothes before putting them in the washing machine. Clothes that have dirt, rocks, or other materials might clog the drain pump or filter. Don’t overload the machine or wash bulky items like blankets or rugs too frequently.
Perform Regular Maintenance
Clean the filter and hose regularly. Check the drain pump impeller about once per month. Remove any debris and dust from around the washer regularly. Doing this will help ensure that your washing machine runs smoothly and prevent any blockages from happening in the future.
In conclusion, clearing blockages in your Electrolux washer’s drain system can be an easy task if you follow these steps and tips. Remember, prevention is always better than cure. By taking preventative measures and performing regular maintenance, your washer will run smoothly and efficiently, and you’ll avoid future headaches and frustration.
Resetting the Control Board on Electrolux Washer for E11 Error
If you own an Electrolux washer, you may have encountered an E11 error, which indicates a problem with the control board. This issue can be easily fixed by resetting the control board, a process that takes just a few minutes. Here’s how to do it:
Step 1: Unplug the Washer
The first step in resetting the control board on your Electrolux washer is to unplug the appliance from the electrical outlet. This will ensure that there is no power running to the washer, which is important when you are dealing with the control board.
Step 2: Wait for 30 Minutes
After unplugging the washer, wait for at least 30 minutes. This will give the control board enough time to reset itself, which will clear any error codes or faults that may have been causing the E11 error.
Step 3: Plug the Washer Back In
After 30 minutes have passed, plug the washer back into the electrical outlet. It’s important to make sure that the plug is securely inserted into the outlet, as this will ensure that the washer receives power.
Step 4: Run a Test Cycle
Once you have plugged the washer back in, run a test cycle to ensure that the E11 error has been cleared. You can do this by selecting a cycle and starting the washer as you normally would. If the washer runs without any issues or error codes, then the control board has been successfully reset.
Additional Tips
While resetting the control board is a simple process, there are a few additional tips that you may want to keep in mind:
- Make sure that the washer is not overloaded or underloaded, as this can cause the control board to register an error code.
- Check the washer’s drain pump and filter for any obstructions, as this can also cause error codes to appear.
- If you continue to experience issues with your washer after resetting the control board, it may be necessary to contact a professional repair technician to diagnose and fix the problem.
By following these simple steps, you can easily reset the control board on your Electrolux washer and clear the E11 error. This will allow you to get your washer up and running again in no time.
Contacting Electrolux Service for E11 Error on Washer
If the Electrolux washer is still displaying the E11 error code after you have gone through the troubleshooting steps we have outlined, it may be time to contact Electrolux service. The manufacturer will be able to assist you in diagnosing the problem and decide what needs to be done to fix the issue.
You can contact Electrolux service through several means. Here are some ways you can get in touch with Electrolux service:
1. Online Service Booking
You can visit the Electrolux website, and select the option for booking a service appointment. You will have to provide the necessary details to help Electrolux service technicians to understand the issue with your washing machine better. Once your booking request is complete, you will receive a confirmation email with the details of your service booking.
2. Phone Support
You can call Electrolux service hotline on their toll-free number, and you will be connected with a representative who will help you set up a service appointment. Be sure to have your Electrolux washer model number and serial number ready when you call the hotline.
3. Email Support
You can send an email to Electrolux customer support. They will get back to you within 48 hours. Provide as much detail as possible in your email to help the customer service representative better understand the issue you are having with your washer. Make sure to include your full name, phone number, and email address so that Electrolux can respond as soon as possible.
4. Chat Support
Electrolux also offers an online chat option. You can visit their website and click on the “Chat” button to start a live chat with a customer representative. Chat support can be very convenient for those who are busy and prefer not to spend time on the phone. However, it is important to provide accurate information that will enable the representative to help you troubleshoot the E11 error.
5. In-person Service
If your Electrolux washer is still giving you problems, despite having gone through all the troubleshooting steps, then you may need in-person service. You can send an Elctrolux service request to have a qualified technician come over to resolve the issue.
The Electrolux technician will examine the machine thoroughly and provide an accurate estimate of the repair costs, including necessary spare parts. After the repair is completed, they will offer to test the machine to ensure that everything is working correctly.
When you make a service appointment, be sure to provide your name, address and phone number. Also, do not forget to provide a clear description of the problem you are having. This information will help the technician to diagnose the problem quickly and efficiently, saving you time and money.
In conclusion, if the E11 error persists even after following all our troubleshooting guides, don’t get frustrated or try to fix the issue yourself. Instead, schedule an appointment with Electrolux service. Their trained technicians will have the knowledge and skills to diagnose and resolve the problem.