How to Troubleshoot and Fix Gel Blasters That Won’t Shoot

Check your battery connection

If your gel blaster is not shooting, the first thing you should do is check your battery connection. This is the most common cause of malfunction in gel blasters. Batteries can become loose or disconnected, which can prevent your gel blaster from working properly. Luckily, checking your battery connection is easy and can usually solve the problem without any need for further repair.

Before you start examining your battery connection, make sure your gel blaster is unloaded and the battery has been removed. This will help you avoid any accidental firing and potential injuries.

Once you have ensured that your gel blaster is unloaded and the battery has been removed, you can begin checking your battery connection. The first thing you should do is examine the battery terminals for any corrosion or debris. If you notice any buildup, use a clean cloth to wipe it away.

Next, check the wiring that connects to the battery. Make sure it is firmly in place and not frayed or damaged. If you find any damage, this will need to be repaired or replaced before you can use your gel blaster again.

Finally, reconnect the battery and turn on your gel blaster. If the battery connection was the problem, your gel blaster should now be working. If not, then you may need to move on to the next step in troubleshooting.

By regularly checking your battery connection, you can prevent malfunctions and ensure that your gel blaster is always ready for action. This simple maintenance task only takes a few minutes and can save you a lot of frustration in the long run.

Make Sure Your Gearbox is Properly Lubricated

One of the most common reasons gel blasters start to malfunction is due to a lack of proper lubrication. Without proper lubrication, your blaster’s gearbox will become dry and start making noises, causing a reduction in the gun’s overall performance. Properly lubricating your gearbox can greatly improve your gel blaster’s performance and increase its lifespan.

First, you need to choose the right kind of lubricant. Avoid using household oils like vegetable oil, WD-40 or any silicone-based oil as they can damage the gearbox. Instead, use a specialized airsoft or paintball oil, which are designed for use in gearbox systems and won’t cause any damage. You can pick up these oils from any airsoft or paintball store, and they come in either spray or drip bottle form.

Next, you need to remove the gearbox from the gun to access the gears. You can easily do this by releasing the gearbox from the gun’s body and unplugging all the wires connected to it. Once you’ve freed the gearbox, remove the motor and carefully spread a thin layer of lubricant on the gears. Make sure to saturate all the gears, but don’t overdo it as this can cause excess oil to spray up and damage the motor.

Once finished, reassemble the gearbox and test your blaster to make sure it’s firing correctly. If you are unsure about how to disassemble your blaster’s gearbox, you can refer to the user manual, or you can also find tutorials on YouTube that can guide you through the process step by step.

If you use your gel blaster regularly, it’s recommended that you lubricate the gearbox once every 5,000 shots. However, if you leave your blaster sitting for long periods, it’s recommended that you perform a thorough lubrication before using it again.

To summarize, if your gel blaster is not shooting, the problem may lie in the gearbox’s lack of lubrication. Make sure to choose the right lubricant, remove and lubricate the gears, and reassemble the gearbox. By regularly lubricating your gearbox, you can greatly improve your gel blaster’s performance and prevent any future malfunctions.

Inspect your magazine for blockages

The magazine is an essential component of the gel blaster as it houses the gel balls that are fired out of the blaster. A common issue that may cause your gel blaster to stop shooting is a blockage in the magazine. This blockage may be caused by dirt or debris that has accumulated in the magazine or a swollen water gel ball that is stuck in the magazine.

To inspect your magazine for blockages, first, remove the magazine from the gel blaster and empty it of any remaining gel balls. Next, hold the magazine up to a light source and inspect the chamber where the gel balls are held. Check for any blockages or debris that may be preventing the gel balls from moving freely through the magazine.

If you notice any dirt or debris, use a cotton swab or a soft brush to remove it from the magazine. Be careful not to damage the magazine while cleaning it. After cleaning the magazine, test it by loading a few gel balls and ensuring that they move freely through it.

If the magazine is still blocked, it may be due to a swollen gel ball that is stuck in the chamber. In this case, remove the magazine from the gel blaster and use a pair of tweezers to carefully remove the swollen gel ball from the magazine. It is important to be gentle when removing the swollen gel ball to avoid damaging the magazine.

Once the blockage has been removed, reassemble the magazine and test it by firing a few gel balls. If the magazine is still not shooting, there may be another issue with the gel blaster that needs to be addressed.

Regularly inspecting your magazine for blockages will help ensure that your gel blaster continues to function properly. It is important to keep your magazine clean and free of debris to avoid any malfunctions that may arise during use. By following these simple steps, you can easily fix your gel blaster not shooting due to a blockage in the magazine and get back to enjoying your favorite gel blaster games.

Check for broken or damaged internal parts

If your gel blaster is not shooting, it is possible that there are broken or damaged internal parts. It is essential to check the inside of your gel blaster to distinguish the specific materials that need fixing. Taking the blaster apart to inspect its internals may seem daunting, but it can be quite simple with the right tools and technique. Here are some tips to help you check for broken or damaged internal parts:

Gather the right tools and equipment

To perform this task, you need to gather a few tools, including a screwdriver and pliers. You will also require suitable lubricants and cleaning tools to clean and maintain your gel blaster regularly. Having the correct tools will help you get the job done quicker and efficiently.

Inspect the gearbox

The gearbox is the heart of your gel blaster. When you pull the trigger, the gearbox actuates the piston. If there are any issues with the gearbox, your gel blaster may not shoot. To examine the gearbox, you must first eliminate the gearbox from the remainder of the blaster. After you have separated the gearbox from the rest of the blaster, you can check it for any broken or damaged gears. If you need to replace any part, make sure it is compatible with your gel blaster.

Inspect the piston and cylinder

The piston and cylinder are located within your gel blaster’s gearbox and are essential for your blaster’s performance. To inspect the piston and cylinder, you must remove the gearbox from the rest of the blaster. After that, you can inspect them for damage or wear and tear. If you notice any deformation or damage to the piston or cylinder, it may be time to replace them.

Check for damaged wires

If your gel blaster is battery-powered, there may be damaged wires that prevent it from shooting. Check the wiring and connectors for any visible signs of breakage or damage. If you notice any issues with the wiring, you can either attempt to repair them or replace the entire wiring system. It is crucial to keep the wiring in good condition to prevent future malfunctions and ensure optimal performance.

Clean and lubricate the internals

Regularly cleaning and lubricating the internals of your gel blaster will help prevent damage and prolong its lifespan. After you have inspected and isolated the damaged parts, you should clean and lubricate the inside of your gel blaster. Use appropriate lubricants and cleaning tools to clean the gearbox, piston, cylinder, and hopper. This will help to prevent wear and tear and any issues that may arise in the future.

Overall, inspecting the internals of your gel blaster is crucial if you are experiencing any issues, such as it not shooting. Taking the time to examine the gearbox, piston, cylinder, wiring, and lubrication will help you to pinpoint specific problems and determine the necessary solutions. With the right tools and techniques, you can fix most problems with your gel blaster’s internals and maintain it for optimal performance.

Adjust your hop-up unit for proper air seal

If your gel blaster is not shooting, the problem could be with the hop-up unit. The hop-up unit is responsible for ensuring that the gel balls are fired with accuracy and consistency. If the hop-up unit is not adjusted properly, it can result in a poor air seal which can cause the gel balls to not shoot or shoot inconsistently. Here are a few steps to adjust your hop-up unit for proper air seal.

Step 1: Check your hop-up unit

The first step is to check your hop-up unit. Remove the hop-up unit from your gel blaster and inspect it for any signs of damage or wear. Check for any cracks, chips or other signs of wear that could cause air leaks. If you notice any damage, you may have to replace the hop-up unit.

Step 2: Adjust the hop-up unit

If your hop-up unit appears to be in good condition, the next step is to adjust it. Start by tightening the hop-up unit until it is snug in the gel blaster. You should feel some resistance when tightening it. This will ensure that the hop-up unit is firmly in place and there are no air leaks. Be careful not to overtighten the hop-up unit as this could cause damage.

Step 3: Test the air seal

After adjusting the hop-up unit, you need to test the air seal. Place your finger over the muzzle of your gel blaster and try firing it. If you feel any air escaping from the hop-up unit or if the gel balls are not shooting, then you need to adjust the hop-up unit some more. If you are not sure if the air seal is correct, you can try a few test shots and inspect the gel balls for any signs of damage or inconsistency.

Step 4: Fine-tune the hop-up unit

Once you have tested the air seal and made the necessary adjustments, you can fine-tune the hop-up unit. This involves adjusting the unit’s tension to get the perfect balance between range and accuracy. Start by loosening the hop-up unit slightly and then test fire the gel blaster. If the range is not what you need, tighten it a bit and test again. Repeat until you get the ideal range and accuracy.

Step 5: Maintenance

It is important to maintain your hop-up unit regularly to ensure that it functions properly. You should clean your hop-up unit after every use to remove any dirt or debris that may have accumulated. You can also lubricate the hop-up unit with silicone oil to keep it working smoothly. Be sure to follow the manufacturer’s instructions for cleaning and maintenance to avoid damaging the hop-up unit.

By following these steps, you can adjust your hop-up unit for proper air seal and get your gel blaster shooting again. Always remember to handle your gel blaster with care and read the manufacturer’s instructions carefully before attempting to make any adjustments.