Troubleshooting Different Colored Govee LED Lights
Govee LED lights are a wonderful way to brighten up your home or office space. However, like all electrical appliances, they can develop issues from time to time – such as different colored bulbs. Here’s a quick troubleshooting guide to fix your Govee LED lights when they’re showing different colors:
Contents
Loose Connections
Ensure all connections to your Govee LED lights are tight. If there are any loose connections, the bulb may have issues functioning at full capacity, thus causing different colored lights to be displayed. Start by checking the power cord connection to your wall outlet. Make sure that the plug or adaptor is securely plugged in and any power outlets on the power cord are properly attached. Then, move to the connection point between the power cord and the LED light strip.
If the connections are loose, the Govee LED lights may not perform optimally, which may cause the bulbs to display different colors. Therefore, ensure they are attached and secure in a way that’s not obstructing the power flow at the slightest degree. Take time to adjust the connections carefully, and give the LED light some time to cool down before plugging it in.
Check For Damage
In the event that there are no loose connections, disconnect the Govee LED light strip from the power source to check for any visible damage. Look for any signs of external damage such as frayed wires, loose wires, or even broken bulbs. These can all affect the flow of electricity, resulting in different colored bulbs.
Be careful while checking for visible damage and ensure you do not work with a live power source. If there are signs of damage, turn off the LED lights and get a professional electrician or replace the damaged bulb. It is never safe to use damaged electrical appliances.
Power Source Issues
Check the voltage of your LED light’s power source. If the voltage is not compatible with that of the LED light, different colors can be displayed. Check the specifications of the LED light and the power source to ensure they match. If they do not match, it may be necessary to replace the power source.
It is also important to avoid using power sources that have been damaged or the ones not meant for the LED lights. Always ensure that the power source is compatible with your LED lights to prevent damage and issues.
Burnt-Out Bulbs
Like most electronic items, Govee LED lights are prone to suffering from burnout, which causes the bulbs not to function optimally, hence resulting in different colors being displayed. To resolve this, you may need to replace the burnt-out bulbs to ensure all the bulbs are functioning optimally.
Before replacing the burnt-out bulbs, ensure you are using LED lights of the same brand and type for compatibility. It is crucial to note that when one bulb burns out, it can affect the other bulbs on the same LED light strip.
Conclusion
Getting different colored Govee LED lights can be frustrating, but with some troubleshooting, it is possible to get these beautiful lights working again. Always ensure the LED light connections are tight, check for damages or visible signs of wear and tear, avoid using power sources that are not compatible, and replace any burnt-out bulbs. By following these tips, you can easily get your Govee LED lights shining bright again.
Checking the Power Supply for Govee LED Strip Lights
If your Govee LED strip lights have different colors, you may want to check the power supply. This can be done easily and quickly. Please follow these steps to check the power supply for Govee LED strip lights:
- First, unplug the Govee LED strip light from the power socket.
- Second, check the AC adapter. Ensure that the AC adapter is correctly plugged in. It is essential to have the correct voltage supplied to the LED strip lights. The AC adapter should be plugged into a wall outlet and not into any other devices.
- Third, check the LED light strip. Ensure that there is no damage to the strip and that all the lights are intact. Check for any rust or damage to the connectors.
- Fourth, ensure that the wires in the LED strip light are connected correctly. The red wire should be connected to the positive terminal, and the black wire should be connected to the negative terminal. Ensure that the wires are not frayed or damaged.
- Fifth, check for any visible signs of damage on the power supply. Look for cracks, breaks, or dents in the casing. Check to see if there are any exposed wires or signs of overheating. If you notice any of these signs, replace the power supply immediately.
After you have checked all of the above steps and are sure that everything is connected and in good condition, plug the LED light strip back into the power socket. Ensure that it is connected to the AC adapter and the wall outlet.
If this does not fix the issue of the Govee LED strip lights having different colors, there may be an issue with the LED controller or the remote control. Try replacing the batteries in the remote control before replacing the LED controller. If this still does not work, the LED controller may need to be replaced.
Checking the power supply is an easy first step in troubleshooting Govee LED strip lights. It is essential to have the correct voltage supplied to the LED strip lights to ensure that they work correctly.
Resetting Your Govee LED Lights to Default Settings
If you’re facing the issue of your Govee LED lights showing different colors, it can be frustrating, but it’s not difficult to fix. The best approach to fixing the issue is by resetting your LED lights. The process is simple and it can be done within a few minutes. Here’s how you can reset your Govee LED lights to default settings.
Step 1: Turn off the Power Supply
The first thing you need to do is turn off the power supply of your Govee LED lights. It’s easy to do, and you can do it by unplugging the power adapter from the electrical outlet or by turning off the switch on the power cord.
Step 2: Press the “M” Button
After turning off the power supply, you need to press and hold the “M” button on the control box of your Govee LED lights. You should hold the “M” button for about 5 seconds until the LED light starts to flash. When the LED light starts flashing, release the “M” button.
Step 3: Wait for the LED Light to Turn Off
Once you release the “M” button, the LED light will flash for a few seconds and then turn off. You should wait for the LED light to turn off completely before proceeding to the next step.
Step 4: Resetting Your LED Lights is Complete
After the LED light turns off, it means that the reset process is complete. Now, you can turn on your Govee LED lights and try operating them again. You should find that the issue of your Govee LED lights showing different colors has been resolved.
It’s important to note that after resetting your LED lights, you will lose any custom settings you had previously set up. The lights will return to the default settings.
The process of resetting your Govee LED lights to default settings is simple, and it can be done without any technical expertise. It’s important to ensure that you follow the above steps carefully. If you encounter any issues during the reset process, you can contact the manufacturer’s customer support for assistance.
Verifying Your Govee LED Light Connection and Placement
If your Govee LED lights are displaying different colors, it could be due to a poor connection or incorrect placement. Here are some tips to help you verify your connection and placement:
1. Check Your Connection
First, make sure that all of the LED light strips are properly connected to the power source. To do this, unplug the power adapter from the outlet and check that each LED strip is securely plugged into the control box. If any of the connections are loose or unplugged, plug them back in and make sure they are securely connected.
2. Check Your Extension Cords
If you have multiple LED light strips, you may be using extension cords to connect them to the control box. Check all of your extension cords to make sure they are fully plugged in and not damaged in any way. If you find any damaged extension cords, replace them immediately.
3. Check Your Control Box
Take a look at your control box and make sure everything is connected properly. Check that the power cord is plugged in and that all of the LED light strip connections are secure. If you notice any loose connections or damage to the control box, replace it.
4. Check Your Placement
Incorrect placement of your LED lights can also cause color issues. Make sure that you’ve placed the LED light strips in the correct order and orientation. The strips should be connected end to end, with the arrows on each strip pointing in the same direction.
Additionally, consider the placement of your LED light strips. If they are too far apart, there may be gaps in the lighting that can cause color variations. Ideally, the LED light strips should be placed as close together as possible, without overlapping or touching each other.
Another factor to consider is the color of your walls and ceiling. If you have light-colored walls or ceilings, your LED lights may appear brighter and more vibrant. However, if your walls are dark or painted in colors that absorb light, your LED lights may appear dimmer and less colorful.
5. Check Your Settings
Finally, double-check your settings on the Govee app or remote control. Make sure that you have selected the correct color and brightness settings for your LED lights. If you’ve recently changed your settings, try resetting the lights and starting over to make sure everything is working properly.
By following these tips, you should be able to fix any issues with your Govee LED lights displaying different colors. If you are still having issues, contact Govee customer support for further assistance.
Updating and Adjusting the Govee LED Light App Settings
Have you ever seen your Govee LED lights displaying different colors, and you were clueless about how to fix them? If yes, we’ve got you covered. In this article, we’ll be discussing how you can fix your Govee LED lights that are displaying different colors by updating and adjusting the Govee LED light app settings.
The Govee LED light app is designed to help you customize your LED lights’ color, brightness, and other parameters to make your home look more beautiful. However, sometimes, the app settings might not be accurate or may have some bugs, which can cause your Govee LED lights to display different colors. Here’s how you can fix it:
1. Update the Govee LED Light App
One of the primary reasons for your Govee LED lights displaying different colors is an outdated app. The developers frequently update the app to fix bugs and introduce new features to ensure the app’s smooth operation. Follow the steps below to update your Govee LED light app:
- Go to the Play Store for Android users or the App Store for iOS users on your mobile device
- Search for the Govee app and click on update if there is any available update
2. Ensure That the App and Lights are Connected to the Same Wi-Fi Network
The Govee LED light app and lights must be on the same Wi-Fi network for the app to function efficiently. If both devices are connected to different Wi-Fi networks, it will cause connectivity issues and cause your Govee LED lights to display different colors. Here are the steps to follow:
- Ensure that your mobile device and light are connected to the same Wi-Fi network
- If they are not on the same network, connect to the same network
- Launch the Govee app, and the lights should work correctly
3. Check the App Settings
You can also fix your Govee LED light app by double-checking the app’s settings to ensure everything is correctly set up. To do this, follow the steps below:
- Launch the Govee LED light app
- Click on the light icon
- Tap the “Edit” button
- Check if the “Music” and “Scene” functions are turned off
- If they are turned on, switch them off, and your Govee LED lights should display correctly.
4. Re-Connect the Bluetooth and Wi-Fi Connection
Another way to fix your Govee LED lights that are showing different colors is to disconnect the Bluetooth and Wi-Fi connection and re-connect them again. To do this, follow the steps below:
- Turn off the Bluetooth on your mobile device
- Close the Govee LED light app on your mobile device
- Turn off your Govee LED lights, wait for a few seconds, and turn them back on
- Turn on the Bluetooth on your mobile device
- Launch the Govee LED app, and your Govee LED lights should display correctly
5. Reset the Govee LED Lights
If all the above steps fail to correct your Govee LED lights’ color, you can try resetting the lights. To achieve this, follow the steps described below:
- Unplug the Govee LED lights from their power source
- Wait for 10 seconds
- Plug the Govee LED lights back into their power source
- Wait for a few seconds and check that the lights are not displaying different colors anymore
In conclusion, displaying different colors for your Govee LED lights is a common issue, and it can be frustrating. Nonetheless, by following the above-listed steps, you can quickly fix the issue and continue enjoying the beautiful lightings in your home.