How to Fix a Tangled Wig: A Step-by-Step Tutorial

Identifying the Tangled Areas

Tangled Wig Hair Sections

Wigs are a great fashion accessory, but they can be a hassle when it comes to detangling them. Detangling your wig can be time-consuming and frustrating, especially for those who are new to the wig game. It’s essential to know how to identify the tangled areas of your wig before you begin to detangle it because simply shooting at the wrong strands may cause your wig to shed, thin, and become frizzy.

The first and most crucial step is to identify the tangled areas of your wig. You’ll want to do this gently and carefully, so as not to damage the wig’s fibers. Start at the base and run your fingers through the hair, feeling for any knots or clumps. You may want to use a handheld mirror to get a better view of any tangles or knots. This will help you identify the problem zones of the wig and work on them individually.

Begin by separating the wig into sections. Use clips to hold each section separately so that they don’t get tangled with the other sections. You may want to use a spray bottle filled with cool water to spritz each section lightly, making it easier to detangle the wig.

If you have a lace-front wig, you should identify the tangles carefully around the hairline. These areas are more likely to get tangled, especially when you wear your wig regularly. Use a narrow-tooth comb, also known as a wig comb, to gentle separate the strands and undo tangles slowly. Start from the tips of the hair and work your way up to the roots.

When detangling curly wigs, use your fingers to separate the curls gently. Curly wigs can become easily tangled, so it’s best to start with a wide-tooth comb. Take each section and use your fingers to detangle the curls gently. Do not pull at the strands too hard, as this may cause breakage and leave the wig looking frizzy.

For straight wigs, do not use a wide-tooth comb. These wigs should only be brushed using a wig brush. These types of brushes are specifically designed for wigs, so they won’t damage your wig’s fibers. Start at the ends and work your way gently up to the roots.

Identifying the tangled areas is the first and most important step when detangling your wig. You don’t want to apply detangler on the wrong strands, which could worsen the situation. Take your time, and be gentle when working on each section of the wig. With the right tools and techniques, you’ll be able to detangle your wig like a pro.

Gather Appropriate Tools and Materials

Tools and Materials for Fixing a Tangled Wig

Before starting the process of detangling a wig, you need to gather all the appropriate tools and materials required. With the right set of tools and materials, the process will become more effortless, and you will be done in no time.

One of the essential tools you will need is a wide-toothed comb. The wide tooth comb can easily detangle the knots formed on the wig without causing any damage to the strands. Along with the wide-toothed comb, you can also use a wig brush, which comes with soft bristles. This can be used to smoothen the hair after detangling. A detangling spray or conditioner is also essential for the process. The spray will help the hair to loosen up, and the conditioner will give it a soft texture.

In addition to the above tools, you will also need a wig stand. A wig stand provides support to the wig and helps you fix it without any hassle. You can easily find a wig stand online or in your nearest wig store. Also, a spray bottle filled with water can come in handy to moisten the strands before you start detangling. In case the hair is severely tangled, you may also need a pair of scissors to remove the knots.

When it comes to materials, a fabric softener can be used to give the wig a fresh look. Also, a tub of lukewarm water is necessary to rinse the wig after detangling. Use a soft towel to pat dry the wig gently.

Lastly, make sure to wear gloves before you start the process. Gloves will protect your hands from any adverse effect that the detangling spray and conditioner might have. Also, you may need a wig cap to protect your natural hair from coming in contact with the detangling solution.

Gathering all the tools and materials might seem like an extensive task, but it’s necessary to ensure that the wig detangling process goes smoothly. You don’t want to interrupt the process midway to find some of the critical tools missing.

In conclusion, the process of detangling a wig requires a lot of patience and the right set of tools and materials. Following this subsection’s tips will ensure that you have everything that you need to fix a tangled wig without causing any damage.

Pre-treatment of the Wig Hair

Pre-treatment of the Wig Hair

Having a tangled wig can be frustrating and make it difficult to style the hair. However, with a little patience and the right technique, you can untangle your wig and bring it back to its former glory. One of the things you need to do before you begin detangling your wig is to prep the hair. Pre-treatment of the wig hair involves a series of steps that will help to minimize damages and make detangling easier. Here are some of the pre-treatment steps you should take:

1. Gather Your Tools

Before you begin pre-treating the wig hair, make sure you have all the necessary tools. You will need a wide-tooth comb, a wig stand or mannequin head, a spray bottle filled with water or a detangling solution, and a conditioner. These tools will help you to detangle the hair without causing any damage.

2. Wash the Wig

The first step in pre-treating a wig is to wash it. Use a mild shampoo and lukewarm water to wash the wig. Place the wig in a basin and let it soak for a few minutes. Afterward, gently massage the shampoo into the hair using your fingers, making sure to focus on the problem areas. Rinse the wig with running water until the water runs clear.

Once you’re done washing the wig, apply conditioner to the hair. This will help to soften the hair and prepare it for detangling. Gently comb the conditioner through the hair using the wide-tooth comb, making sure that the hair is evenly coated. Leave the conditioner in the hair for a few minutes before rinsing it out thoroughly with warm water.

3. Use a Detangling Solution

If you’re struggling with a particularly stubborn tangle, you might want to consider using a detangling solution. Detangling solutions can help to soften the hair, making it easier to comb through. One way to make your solution is by mixing a tablespoon of fabric softener with a cup of water in a spray bottle.

To use the detangling solution, spray it evenly onto the hair, focusing on the tangled areas. Let it sit for a few minutes so the solution can penetrate the hair. Then, use the wide-tooth comb to gently comb through the hair, starting from the ends and working your way up to the roots. As you comb through the hair, make sure you’re doing it gently and not pulling too hard to avoid damaging the hair. Repeat the process until the tangles are gone.

4. Let the Wig Air Dry

After you’ve finished detangling your wig, do not use a blow dryer to dry the hair. Instead, let the hair air dry. Place the wig on a wig stand or mannequin head and allow it to air dry naturally. If you must use a hairdryer, use it on the lowest heat setting possible, and hold it at least six inches away from the hair to avoid destroying the fibers’ integrity.

In conclusion, pre-treatment of the wig hair is essential to detangling the hair without causing any damage. By following the steps above, you can prep the hair for detangling and restore your wig to its former glory. Remember always to be gentle with the hair and use the right tools and products to avoid tangling and any other damages that may occur.

Fixing the Tangled Sections

Tangled Wig Hair Problems

Wigs are a great way to change your hairstyle without getting a permanent haircut or dying your hair. However, wigs can be difficult to manage at times, especially when they become tangled. A tangled wig can be frustrating, but there are ways to fix it. This article will walk you through the steps of fixing tangled sections of your wig so that you can get back to wearing it with ease and confidence.

Step 1: Detangling the Wig

Detangle Wig

The first thing you need to do is detangle the wig. Start by combing through the wig with a wide-toothed comb, starting at the ends and working your way up to the roots. Avoid pulling too hard on the tangled sections, as this can cause damage to the hair fibers and make the tangling worse. Use your fingers to gently separate the strands of hair if the comb is not enough to detangle the hair. Never use a regular brush or fine-toothed comb as these can damage the hairs.

Step 2: Apply a Wig Detangling Spray

Wig Detangling Spray

If detangling the wig with a comb and your fingers does not work, try applying a wig detangling spray. A wig detangling spray contains a mixture of conditioners and oils that help to restore moisture to the wig fibers. It will make the tangled sections softer and easier to manage. Spray a small amount of the detangler onto the tangled section and gently comb through the hair with a wide-toothed comb or your fingers. Repeat until the section is detangled.

Step 3: Wash the Wig

Washing wigs at home

If the tangles will not come out, you may try washing your wig. Depending on the quality of your wig, you can use a mild shampoo or a wig shampoo to wash it. Use cool water to wet your wig and apply shampoo to the strands. Gently work the shampoo through the hair with your fingers, avoid scrubbing or rubbing the hair. Rinse the shampoo out with cool water.

Step 4: Soak in Fabric Softener and Cool Water

Soaking wigs in fabric softener

If your wig is still tangled, try soaking it in fabric softener and cool water. Fabric softener will help to soften the tangled fibers, making them easier to manage. Mix a small amount of fabric softener in cool water in a container, enough to cover the wig. Gently swirl the wig around in the mixture, so it is fully immersed. Let it soak for 30 minutes, then rinse the wig with cool water.

Fixing a tangled wig can be frustrating, but with patience and the right products, it is possible. Always be gentle with your wig, as the fibers are delicate and can easily become damaged. Be sure to store your wig properly to avoid tangling and keep it looking beautiful and ready to wear. Remember, with the right care and maintenance, your wig can last for years.

Post-treatment of the Wig Hair

Post-treatment of the Wig Hair

After untangling your wig, you need to take some time to give it a post-treatment that will leave it looking just as good as new. Below are some steps that you can take to make sure that your wig remains in excellent condition:


After untangling your wig, brush it through gently with a wide-toothed comb starting from the bottom and working your way upwards. In this way, you can make sure that there aren’t any tangles left behind. Also, it helps in giving the wig a smooth texture that will make it look natural on you.


Washing your wig is also an essential step in post-treatment. To start with, you need to prepare warm water and then add some specific wig shampoo to it. Dip your wig in the water and then start gently rubbing it between your palms ensuring that the strands are clean and free from any oil or dirt. Rinse the wig under cold water and then put it under a towel to remove any excess water. Make sure to let it dry completely before wearing it again


The wig conditioner helps in keeping the wig soft and moisturized while also making it easier to manage and style. After washing your wig, you should apply some wig conditioner before leaving it to dry. As this helps in keeping the wig from knotting again.


Once the wig is dry, you can start styling it. For heat-resistant wigs, you can style with a flat iron or curling iron without damaging it. But for non-heat resistant wigs, you can style using cold rollers or perm rods and achieve your desired look. Make sure you don’t use a lot of heat on non-heat resistant wigs as it will ruin the wigs’ texture and quality.


How you store your wig is also very important in ensuring that it remains in excellent condition. Get a wig stand that will keep your wig in shape and avoid storing it in a place that can be damaged by sudden environmental changes like direct sunlight or humidity. Additionally, use a wig cap to protect the wig from oil and sweat that your head may secrete. It will help in keeping the wig clean when storing it and preventing knotting of the strands.

In conclusion, by following these post-treatment steps, you can preserve the wig’s quality, durability and make it last longer. Remember to take good care of your wig as they may be expensive, and some may carry sentimental values. By implementing these steps, you can rest easy knowing that your wig is well taken care of.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top