How to Fix Uneven Cellular Blinds with Cord

Identifying the Cause of Uneven Cellular Blinds


Cellular blinds, also known as honeycomb shades, are made up of a series of small cells that trap air between the window and the room. This provides insulation and improves energy efficiency by reducing heat loss in the winter and heat gain in the summer. The cords that control the opening and closing of the blinds can also cause them to become uneven. If you notice that your cellular blinds are uneven, it is important to identify the cause before attempting to fix them. Below are some of the common causes of uneven cellular blinds:

The Length of The Cords

The length of the cords can cause the blinds to become uneven. If one of the cords is too short, it may cause the blinds to pull to one side. On the other hand, if one of the cords is too long, it may cause the blinds to sag on one side. You can easily check the length of the cords by measuring them. If you find that one of the cords is shorter or longer than the others, you will need to adjust it to match the length of the other cords. This will help to ensure that the blinds open and close evenly.

Loose or Tight Cords

Loose or tight cords can also cause cellular blinds to become uneven. If one of the cords is loose, it may not pull the blind up evenly. Similarly, if one of the cords is too tight, it may cause the blinds to pull to one side. You can check the tension of the cords by gently pulling each cord individually. If you find that one of the cords is loose or too tight, you will need to adjust it to ensure that all cords have the same tension.

Obstructions in The Track

If there are obstructions in the track, it can also cause cellular blinds to become uneven. Dirt, dust, or debris can accumulate in the track over time, preventing the blinds from moving up and down smoothly. You can clean the track by using a vacuum cleaner or a soft brush to remove any dirt or debris. This will help to ensure that the blinds move up and down smoothly without getting stuck or snagged on any obstructions.

Bent or Broken Components

If one of the components of the cellular blinds is bent or broken, it can cause the blinds to become uneven. You should inspect the blinds to see if any of the components are bent or broken. If you find any bent or broken components, you should replace them to ensure that the blinds function properly. You may be able to order replacement parts from the manufacturer or purchase them from a home improvement store.


Identifying the cause of uneven cellular blinds is the first step in fixing them. Once you have identified the cause, you can take the necessary steps to correct it. If you are unable to fix the issue on your own, you may need to contact a professional for assistance. By ensuring that your cellular blinds are functioning properly, you can improve the energy efficiency of your home while also maintaining a comfortable and stylish living space.

Tools You Will Need for Repairing Your Blinds

blind repair tools

Cellular blinds are a great addition to any home as they are energy-efficient and stylish. However, it is not uncommon for cellular blinds to experience some issues over time, and one of them is unevenness caused by cord damage. When the cords that hold the blind slats become worn or damaged, the blind may become lopsided. The good news is, it is a problem that can be easily fixed with some simple tools. Below are the tools you will need if you want to repair the cords of your uneven cellular blinds.

  • Scissors or snips – You will need these to cut the cords of your cellular blinds.
  • Needle-nose pliers – These tools will help you to grab the cords more easily, making it easier to thread them through the blind’s cord lock.
  • Replacement cords – Once you’ve cut the old cords, you’ll need new ones to replace them. You can buy replacement cords from hardware stores or online.
  • A screwdriver – You may need a screwdriver to remove the end caps from the headrail of the cellular blind. This will allow you to access the cords that need replacing more easily.
  • A ladder – If your cellular blinds are in a high area, you’ll need a safe and stable ladder to access them.

When buying replacement cords, make sure they match the color of the current cords as closely as possible. This will help to ensure that the blind looks consistent after repair. Also, be sure to measure the length of the old cords and buy cords that are of the same length.

Now that you know what tools you need to fix your uneven cellular blinds, let’s move on to the next step: how to replace the cords.

How to Fix Uneven Cellular Blinds with Cord

Step-by-Step Guide to Adjust the Cord Tension of Your Blinds

Blinds with Cord Tension Adjustment

If your cellular blinds with cords are uneven, then you have to adjust the cord tension. It is not a difficult task and can be done easily by following a few simple steps. This guide will help you to adjust the cord tension and fix your uneven cellular blinds with cord.

Step 1: Locate the cord lock mechanism – The cord lock mechanism is typically located on the upper right or left side of the blinds. It is a box-shaped or cylindrical device that holds the cords in place and allows you to adjust the length of the cords.

Step 2: Remove the blinds from their brackets – To adjust the tension of the cords, you’ll need to remove the blinds from their brackets. Simply slide the brackets out of the rail to release the blinds.

Cord Lock Mechanism

Step 3: Adjust the cord tension – For this step, you need to identify the cord that controls the side of the blind that needs to be adjusted. Pull down on the cord to take up the slack and adjust the length of the cord. You should pull the cord gently in small increments until the blind is at the desired length. Once you’ve adjusted the cord, release the cord lock mechanism to hold the cord in place.

Cord tension can also be adjusted by releasing the cord lock mechanism and pulling the opposite cord to tighten the tension.

Adjusting Cord Tension of Cellular Blinds

Step 4: Reinstall the blinds – Once you’ve adjusted the cord tension of your cellular blinds, you need to reinstall the blinds. Slide the brackets back into the rail until they click into place.

Step 5: Test the blinds – Finally, pull the cord to raise and lower the blinds. Check that the blinds are at the desired length and that the cords are holding the blinds in place. If the blinds are still uneven, then you may need to adjust the tension of the cords further.

It is important to note that cellular blinds with cords may eventually wear out and need to be replaced. If you’ve followed these steps and your blinds are still uneven, then it may be time to replace them.

In conclusion, adjusting the cord tension of your cellular blinds with cord is a simple process that can easily solve the problem of an uneven blind. Just follow these steps to adjust the cord tension and fix your blinds. If you have any doubt, don’t hesitate to seek the help of a professional.

Troubleshooting Common Problems with Corded Cellular Blinds

Corded Cellular Blinds

Corded cellular blinds are a popular and stylish choice for window coverings, but like any blind, they can encounter problems that need fixing from time-to-time. Common issues include unevenness, broken cords, and difficulty raising or lowering the blinds. Luckily, many of these problems can be easily fixed at home with a few simple tools and techniques. Here are some of the most common problems with corded cellular blinds and how to fix them.

How to Fix Uneven Cellular Blinds

Uneven Cellular Blinds

If your corded cellular blinds are uneven, it can be frustrating and can ruin the look of your entire room. The good news is that this problem can often be fixed with a few simple adjustments.

Firstly, make sure that the cords on each side of the blind are of equal length. If one cord is longer than the other, it will cause the blind to be uneven. To fix this, remove the end-cap on the side of the blind with the longer cord and trim down the cord to the same length as the other one.

If the cords are already the same length and the blind is still uneven, there may be dirt or debris clogging the cords or the guides the cords run through. Unscrew the bottom rails of the blinds and run a vacuum or compressed air over the cords and guides to remove any dirt or debris that may be causing the issue.

Finally, it’s worth checking that the brackets holding the blinds in place are secure. Loose brackets can cause the entire blind to tilt, making it look uneven. Tighten all screws and ensure that the brackets are firmly fixed in place.

If you have followed these steps and your corded cellular blinds are still uneven, it may be time to call in a professional for further assistance.

Maintaining Your Blinds to Prevent Unevenness in the Future

Maintaining Blinds

Cellular blinds are a popular choice among homeowners for covering their windows for various reasons. These blinds offer a significant level of privacy, allow natural light into the room, and are an excellent way to reduce energy bills by controlling heat loss. However, like most things, cellular blinds will eventually wear out and require some maintenance. If left neglected, they may become uneven with tangled cords, reducing their effectiveness and ruining the home’s ambiance. Here’s how you can maintain your blinds to prevent unevenness:

1. Regular Dusting and Cleaning

Cleaning Blinds

Dusting and cleaning your cellular blinds regularly are essential, as dust and grime can sink into the fabric, making it difficult to clean and leaving unsightly stains. For regular cleaning, you can use a feather duster or a soft cloth. If the blinds are looking particularly dirty, you can use a damp cloth or sponge to wipe them clean. However, be sure to use a mild cleaning solution, as harsh chemicals can cause damage to the fabric.

2. Proper Use of Cords

Blinds Cord

If you want to keep your cellular blinds working smoothly, it’s essential to use the cords properly. If you pull the cords too hard, they will start to tangle, causing the blinds to become uneven. To maintain the cords correctly, always use a gentle touch when opening and closing the blinds.

3. Regular Inspections

Blinds Inspection

An essential part of maintaining your cellular blinds is performing regular inspections. This involves checking the cords for tangles, making sure the blinds are perpendicular to the window, and checking for any damage to the fabric. If there are any issues, address them promptly to prevent further damage and ensure the blinds function properly.

4. Be Careful When Pulling the Blinds Up or Down

Pulling Blinds

When pulling the blinds up or down, be mindful of how hard you’re pulling them. If you pull the blinds too hard, the cords will tangle, and the blinds will become uneven. It’s best to use a gentle touch when opening and closing the blinds. Additionally, avoid holding the blinds by the fabric as this can cause damage to it.

5. Professional Repairs and Cleaning

Professional Cleaning Blinds

While regular maintenance is important, there comes a time when you need to consult a professional. If your cellular blinds are damaged or incredibly dirty, it’s best to hire a professional for repairs and cleaning. They have the necessary expertise and equipment to ensure your blinds are as good as new. Professional cleaning can also be done to not only prolong the life of your blinds but also reduce the number of allergens in your home.

It’s essential to maintain your cellular blinds to keep them looking great and functioning well. Regular cleaning and proper use of cords are significant factors in ensuring they remain perfectly even. With these simple tips, you can significantly extend the lifespan of your cellular blinds, reduce the need for costly repairs, and avoid the nuisance of tangled cords.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top