How to Fix Uneven Honeycomb Blinds with Cord

Understanding the Issue: Uneven Honeycomb Blinds

Uneven Honeycomb Blinds

If you have honeycomb blinds in your home, you know how beautiful they can look. They are an excellent choice for many homeowners because of their energy-efficient, insulating properties that can help you save on heating and cooling bills. However, one common issue with honeycomb blinds is that they can become uneven over time. This issue usually happens when the cord inside the honeycomb blinds gets tangled or broken. Here is an in-depth guide on how to fix uneven honeycomb blinds:

The problem of uneven honeycomb blinds can affect any blinds with a cord, such as cellular shades, Roman shades, and more. The primary cause of the issue is the tangled or broken cord that controls the movement of the honeycomb blinds. Once the cord gets tangled or damaged, it starts to affect the blinds’ movement, making them uneven. When this happens, the honeycomb blind can move faster on one side than the other. Adjusting it like a regular blind will be impossible, and it can end up looking unattractive and awkward.

The cord controls the honeycomb blind’s movement by pulling the cord out or letting it back in. The honeycomb blind will move up or down, depending on the cord’s direction. In the case of uneven honeycomb blinds, the cord becomes tangled, resulting in the blind moving up or down on one side faster or slower than the other. A similar effect can happen when the cord is broken, meaning the honeycomb blind may only move on one side and remain stuck on the other.

To fix an uneven honeycomb blind caused by a tangled cord, you will need to locate the cord inside the honeycomb blind’s headrail and untangle it. The headrail is the long piece that runs across the top of the honeycomb blind, and it houses the cord. To access it, you will need to lift the honeycomb blind by removing it from the brackets holding it in place. When detaching the honeycomb blind, make sure to place it on a flat surface to avoid damaging it

Next, locate the end of the cord inside the headrail where it is tied to the honeycomb blind. Start untangling the cord gently, using a stick or your hand, depending on the cord’s position. It is essential to be careful when untangling the cord to avoid causing any further damage. The process of untangling the cord can be time-consuming, depending on the degree of tangle, so patience is key. Once you have untangled the cord, reposition the honeycomb blind back into the brackets and test its movement. If the cord was the primary cause of the honeycomb blinds getting uneven, the issue should be resolved by now, and the honeycomb blind should move evenly once again.

If the cord is broken or some other issue caused the problem, you may need to replace the cord or contact professionals to repair or replace the honeycomb blinds. Always remember it is best to leave the repair or replacement to professionals if you lack the necessary experience to avoid further damage or safety risks.

Gathering Necessary Tools and Materials

uneven honeycomb blinds with cord

Fixing uneven honeycomb blinds with cord is not as difficult as it may seem, but you need to have the right tools and materials to do it efficiently and effectively. In this guide, we will provide you with a list of necessary tools and materials you’ll need.

Tools Required

  • Measuring tape
  • Scissors
  • Pliers
  • Screwdriver

Materials Required

  • Replacement cord
  • New string retainers (if needed)
  • Cleats or cord stops

Let’s take a look at each tool and material in detail:

Measuring Tape

The first tool you’ll need is a measuring tape. It is essential in measuring the length of the new cord you will need to replace the damaged one. You should measure both the length and the width of your honeycomb blinds to ensure you purchase the right length of cord.


Scissors are required to cut the new cord to the right length. They should be sharp and clean enough to produce a neat cut.


You’ll need pliers to remove the old cord entirely, which could be a difficult task if the cord is tightly woven around the blinds. Pliers can also help you realign the cords properly after replacing them.


A screwdriver is necessary if you need to remove the blinds or the brackets from the window to change the cord. You may have to remove a few screws, depending on the type of bracket used for installing your honeycomb blinds.

Replacement Cord

It is essential to replace the old cord with a new one that has the same thickness and strength as the original one. The cord should be long enough to cover the length and width of your blinds. The length of the cord is the perimeter of the honeycomb plus 1 metre. You can buy replacement cord in fabrics and DIY stores, or you can order them from online stores.

New String Retainers (if needed)

If the old string retainers are damaged, it is essential to replace them with new ones to prevent the new cord from slipping out of the desired position. New string retainers are usually available at the same stores you can purchase the cords.

Cleats or Cord Stops

Cleats or cord stops are used to secure the new cords in their positions. These accessories will prevent the cords from tangling and keep them in place even if you pull the blinds up or down. Remember to position these accessories beyond the reach of children.

Now that we have looked at the tools and materials you’ll need to fix uneven honeycomb blinds with cord, let’s move to the next step, which is preparing the blinds for repair.

Step-by-Step Guide: Fixing Uneven Honeycomb Blinds with Cord

uneven honeycomb blinds with cord

Uneven honeycomb blinds with cord can be a real pain. Not only do they look unattractive, but they can also be difficult to operate. Fortunately, fixing uneven honeycomb blinds with cord is a relatively easy task that can be accomplished in just a few simple steps. Here’s a step-by-step guide on how to do it.

Step 1: Secure the Blind

uneven honeycomb blinds with cord

The first step is to secure the blind in place. Ensure that the blind is fully lowered and that the cord is taut. Locate the cord lock and engage it to hold the blind in place. This will prevent the blind from moving while you work on it.

Step 2: Adjust the Cords

uneven honeycomb blinds with cord

The next step is to adjust the cords. Start by identifying the cord that is causing the blind to be uneven. This is usually the cord that is loose or slack. Once you have identified the cord, gently pull it until the blind starts to straighten out. It is important to do this slowly and incrementally. Keep adjusting the cord until the blind is fully straightened out.

Step 3: Tie Off the Cord

uneven honeycomb blinds with cord

Once the blind is straightened out, tie off the cord to keep it in place. You can do this by wrapping the cord around the nearest cord guide and tying a knot. Make sure that the knot is secure and won’t come undone. If you have trouble tying a knot, you can also use a cord clip to secure the cord in place.

Step 4: Test the Blind

uneven honeycomb blinds with cord

The final step is to test the blind to ensure that it is working properly. Release the cord lock and gently pull the cord to raise the blind. The blind should raise and lower smoothly without any hanging or snagging. If the blind is still uneven or difficult to operate, repeat the steps above until it is fully straightened out.

Fixing uneven honeycomb blinds with cord is a quick and easy process that can be accomplished in just a few simple steps. By following this guide, you can straighten out your uneven honeycomb blinds and keep them looking great for years to come.

Common Mistakes and How to Avoid Them

Cord of uneven honeycomb blinds

If you are a proud owner of honeycomb blinds, then you know how important it is to keep them in perfect condition. However, even with proper care, you might encounter some problems such as uneven honeycomb blinds with cord. While this problem may seem daunting, don’t worry because it’s solvable. In this article, we are going to explore some common mistakes that cause honeycomb blinds to have uneven cords and how you can avoid them.

1. Using too much force

Honeycomb blinds with cord

One common mistake that people make when trying to fix uneven honeycomb blinds is using too much force. Honeycomb blinds are delicate and require a gentle touch, especially when it comes to adjusting the cord. Applying too much pressure on the cords can cause them to snap or tangle, hence making the problem worse. Therefore, avoid using excessive force when adjusting the cords.

2. Not checking the cord

Uneven honeycomb blinds with cord

Another mistake that people make when their honeycomb blinds become uneven is failing to check the cord. Sometimes, the problem might not be with the blinds, but rather the cord may be tangled or twisted. In such a case, it’s essential to check the cord first before you start adjusting the blinds. If the cord is tangled, untangle it first before proceeding to adjust the blinds.

3. Not aligning the cords

Honeycomb blind cord problems

Aligning the cords is an important step in fixing uneven honeycomb blinds. The cords need to be in a straight line for the blinds to hang evenly. Failing to align the cords can lead to an uneven distribution of weight, which will make some parts of the blinds longer than others. To align the cords, gently pull on the cords on either side of the blinds until they are in a straight line.

4. Not cleaning the blinds regularly

How to clean honeycomb blinds

Cleaning your honeycomb blinds is an essential part of maintaining them. Regular cleaning helps to prevent the buildup of dust and debris, which can cause the cords to become dirty and sticky. Sticky cords don’t move smoothly through the pulleys, which can lead to uneven blinds. Therefore, it’s essential to clean your honeycomb blinds regularly using a soft cloth or a vacuum cleaner with a brush attachment.

With the above common mistakes and how to avoid them, you can now be able to fix your honeycomb blinds with uneven cords. Remember to avoid using too much force, check the cords, align them, and clean the blinds regularly. With proper care, your honeycomb blinds will remain in good condition for many years.

Maintaining Your Honeycomb Blinds for Longevity

Maintaining Honeycomb Blinds

When it comes to window treatments, honeycomb blinds are one of the most popular choices for homeowners. These blinds offer a sleek and modern look that can enhance the appearance of any room. Additionally, they are versatile and functional, making them ideal for any home decor. However, like with any other home item, honeycomb blinds need proper maintenance to extend their lifespan. Here are some tips to help you maintain your honeycomb blinds for longevity:

1. Dust your Honeycomb Blinds Regularly

Dusting Your Honeycomb Blinds

Dusting your honeycomb blinds should be part of your regular cleaning routine. Dirt and dust buildup can cause allergies, respiratory problems, and degrade the overall appearance of the blinds. You can use a vacuum cleaner with a brush attachment to clean gently the shade’s fabric. For stubborn stains, use a soft-bristle brush and warm soapy water.

2. Clean the Cords of Your Honeycomb Blinds

Cleaning the Cords of Honeycomb Blinds

The cords in the honeycomb blinds are prone to dirt and grime accumulation. Dusting the cords utilizing a soft duster or microfiber towel. If the cords are dirty, you can clean them by spraying a bit of rubbing alcohol and wiping them down carefully with a clean cloth. The same process applies to metal chains if your honeycomb blinds use them.

3. Inspect the Slats of Your Honeycomb Blinds

Inspecting the Slats of Honeycomb Blinds

Occasionally inspect your honeycomb blinds for broken or damaged slats. If you find any, make necessary repairs or replacements to them. Replacing the damaged slats will help you avoid experiencing further damage, which increases the longevity of your honeycomb blinds.

4. Avoid Over-Pulling the Cords

Avoid Over-Pulling the Cords of Honeycomb Blinds

You mustn’t over-pull the cords of your honeycomb blinds because it will inevitably lead to unevenness. Pull the cords gently; it will help maintain the shape of your honeycomb blinds after adjusting them. In case you encounter unevenness in the blinds, lift and lower it to set straight, or you can adjust it manually.

5. Professional Cleaning

Professional Cleaning of Honeycomb Blinds

While proper maintenance can help you prolong the life of your honeycomb blinds, they will still need some professional touch-up once in a while. A professional cleaning company has the expertise and experience to handle your honeycomb blinds with care, removing stubborn stains and cleaning hard-to-reach areas that you may have missed. It would be best if you got your honeycomb blinds professionally cleaned every year or so.

The above tips will help to maximize the lifespan of your honeycomb blinds. Proper maintenance not only will extend the life of your honeycomb blinds but also ensures that they always look great and perform at their best.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top