Understanding the issue with X button
Playing games on PS4 is an exciting experience for gamers. However, it can be quite frustrating when the X button on the PS4 controller stops working. It is one of the most common issues that PS4 gamers face. The X button is responsible for a lot of in-game actions such as jumping, interacting, or picking up items. Therefore, when it stops working, it can hamper the gaming experience. Understanding the issue with the X button is the first step towards fixing it.
The primary reason why the X button on the PS4 controller stops working is the accumulation of dirt, dust, and debris inside it. Over time, the debris accumulated inside the button can interfere with its contacts, resulting in no or delayed response. In some cases, the contacts can also become corroded, making it harder for the button to register with the controller.
Apart from dirt and debris, the X button can also malfunction due to the disconnection of the button membrane or the wear and tear of the conductive rubber pad. The membrane of the X button connects the button to the circuit board of the controller. It can become loose or damaged, causing issues with the X button. Similarly, the conductive rubber pad can wear out over time, making it difficult for the X button to make proper contact with the controller.
Another reason why the X button can stop working is due to software and firmware issues. Updates to the PS4 or the controller can cause issues with button mapping, making it harder for the X button to register with the controller.
Understanding the underlying cause of the issue with the X button can help in diagnosing the problem. Once the problem is diagnosed, repairing the X button is a reasonably straightforward process. There are several ways to fix the X button on the PS4 controller, which we will discuss in detail in the following sections.
Tools Required for Fixing X Button
Is the X button on your PS4 controller not working? No problem! You can fix it yourself with just a few tools and a bit of patience. Here are the tools you’ll need:
- Screwdriver (preferably a T8 security bit)
- Cotton swabs
- Rubbing alcohol
- Small cleaning brush
- Replacement button kit (optional)
Now that you have all your tools, let’s get started fixing your X button.
First, you’ll need to unscrew the back of your controller using your screwdriver. Be sure to keep track of all the screws so you don’t lose them! Once you’ve got the back of the controller off, you’ll be able to see the inside of the controller and the button mechanisms.
Using your cotton swabs and rubbing alcohol, you’ll want to clean the button and the surrounding areas. This will ensure that any buildup or grime that may have accumulated is removed, and that the button can move freely and easily. A small cleaning brush can also help with this process, especially for hard-to-reach areas.
If cleaning the button doesn’t fix the issue, you may want to consider replacing the button altogether. You can purchase replacement button kits online for a relatively low cost and they come with all the tools you’ll need to make the switch.
Replacing the button simply involves unscrewing the old button and screwing in the new one with the provided tools. Just be sure to pay close attention to how the old button was positioned so you can place the new one correctly.
Once you’ve cleaned or replaced the button, it’s time to screw the back of the controller back on and test out the X button. If it still isn’t working, you may want to consider contacting Sony for further help or taking your controller to a professional for repair.
Fixing the X button on your PS4 controller may seem intimidating at first, but with the right tools and a little know-how, it’s definitely doable. Just be sure to take your time and be patient with the process, and you’ll have your controller working like new in no time.
Steps to disassemble PS4 controller
If you’re experiencing issues with your PS4 controller’s ‘X’ button, you may need to open up the device and take a closer look at the components. Here are the steps you need to take to disassemble your PS4 controller:
-
First, turn off your PlayStation 4 console and unplug the controller from it. This will ensure that there is no power going to the device while you work on it.
-
Next, use a small screwdriver or other tool to remove the four screws on the back of the controller. These are located in each corner, so be sure to check them all.
-
Once the screws are removed, use a prying tool to gently push the back cover of the controller away from the front cover. Be careful not to use too much force or you may damage the device.
When opening the PS4 controller, you’ll also want to take extra precautions with the rumble motors and the ribbon cable that connects the battery to the motherboard. Be sure to take pictures or notes to aid in replacing these parts correctly after repairing the X button.
Use a prying tool to lift the battery out of its recess and disconnect it from the motherboard. Remember that the ribbon cable is fragile, so be patient and gentle when removing it. Using a spudger (or your thumbnail), gently pull up the locking tab securing the ribbon cable to the motherboard. Once the tab is up, the ribbon cable should easily slip out of its socket. After the ribbon cable is removed, the back plate should detach from the controller’s board.
You should now have the inner workings of your controller exposed. You’ll be able to locate the X button and determine what, if any, issues are preventing it from functioning properly. Check for any visible physical issues, such as damage or debris.
-
If you identify an issue with the X button or any other component, you’ll likely need to replace the affected part. This may require ordering new components and waiting for them to arrive.
-
Once you’ve identified and addressed the issue, simply reassemble your PS4 controller by reversing the steps above. Be sure to take your time and secure all screws and components tightly to ensure that your controller functions correctly after disassembly.
Remember: opening up your PS4 controller can be tricky, and it’s important to take your time and be gentle throughout the process. If you’re uncomfortable tinkering with electronics or are unsure of what you’re doing, it may be best to reach out to a professional for assistance. Otherwise, follow these steps with care to get your PS4 controller functioning correctly again and get back to your favorite games!
Fixing X button: cleaning vs. replacing
If your PS4 controller’s X button isn’t working properly, then there are two options to fix it. You can either clean it or replace it. Cleaning the button is the recommended option if the problem is a sticky button. Replacing the button is the best option if your button is broken.
Before deciding whether you should clean or replace your X button, it is essential to know what caused the problem. If you are unsure about what caused the problem with your X button, it is best to start by cleaning it.
Cleaning the X button is a simple process that requires only a few tools. Start by removing the button from the controller. You can do this by removing the two screws that hold the button in place. Use a small screwdriver to remove the screws. Once the button is off, clean it with a cotton swab or a soft-bristled toothbrush and rubbing alcohol. Be gentle when you clean the button to avoid damaging the contacts. Once you have finished cleaning, reattach the button and test it to see if it is working correctly.
If cleaning your X button doesn’t work, then you should consider replacing the button. Replacing the X button is a more complicated process that requires some additional tools. You will need a soldering iron and a new button. You can purchase replacement buttons online or at your local electronics store.
To replace the button, you need to remove the old button from the circuit board. Use a soldering iron to melt the solder that holds the button to the circuit board. Carefully remove the old button and clean the area where the new button will go. Align the new button with the holes in the circuit board and solder it in place. Be careful not to use too much heat when soldering, as this can damage the circuit board.
Once you have replaced the button, reassemble the controller and test it to see if the X button is working correctly. If you are not confident about replacing the button, then it is best to take your controller to a professional for repair.
It is essential to clean your PS4 controller regularly to prevent problems with the buttons. Buttons can become sticky if dirt and grime build up around the button’s edges. Regular cleaning with rubbing alcohol can help remove this buildup and prevent your buttons from sticking.
To clean your controller, start by removing the battery. This will prevent any damage from occurring to the electrical components of the controller. Use a soft cloth or a cotton swab to clean the surface of the controller. Pay special attention to the X button and any other buttons that you use frequently. Once you have finished cleaning, reassemble the controller and test it to see if it is working correctly.
In conclusion, fixing your PS4 controller’s X button requires you to decide whether to clean or replace the button. If the button is sticky, then cleaning it is the best option. If it is broken, then replacing it is the best option. Regular cleaning of your controller can prevent problems with your buttons from occurring in the first place.
Reassembling PS4 controller and testing X button
Now that we have fixed the X button on our PS4 controller, it’s time to reassemble it and make sure that everything is working properly. Here are the steps you need to follow to reassemble your PS4 controller:
Step 1: Put the faceplate back on the controller. Align the screw holes and gently press the faceplate down onto the controller. Screw in all the screws with your Phillips screwdriver, making sure not to over-tighten them.
Step 2: Reattach the battery. Take the battery and slide it back into place on the controller. Make sure to align the gold metal leads of the battery with the contacts on the controller. Push down on the battery to ensure that it’s firmly in place.
Step 3: Connect the ribbon cables. First connect the touchpad ribbon cable, making sure it clicks into place. Then connect the ribbon cable for the light bar, making sure to align it correctly and press down to secure it.
Step 4: Reattach the motherboard. Carefully place the motherboard back into the controller, making sure that it sits flush against all the other components. Screw in the three screws with your Phillips screwdriver.
Step 5: Reattach the back plate and the screws. Line up the back plate with the controller and snap it into place. Then screw in all the screws with your Phillips screwdriver, making sure not to over-tighten them.
Now that the PS4 controller has been reassembled, it’s time to test the X button to make sure that it’s working properly. Here’s how:
Step 1: Turn on your PS4 console. Make sure that your PS4 is turned on so that you can test the controller.
Step 2: Press the X button. Press the X button on your controller to make sure that it’s working properly. The X button should respond just like any other button on the controller.
Step 3: Play a game. Load up a game and start playing. Make sure that the X button responds properly when you need to use it in the game. If there are any problems, go back and check that you have reassembled the controller correctly.
If everything is working properly, congratulations! You have successfully fixed the X button on your PS4 controller. If you are still having problems, it may be time to replace the X button itself or seek professional help to fix the issue.