Identifying the source of the loud noise
If you are a professional or home groomer, you must have experienced the Wahl clipper’s loud noise. Wahl clippers are considered to be among the best in the market because of their durability and ability to handle different hair types. However, over time, they may develop a loud noise, which can be annoying and unbearable to some people. This article will unravel a few solutions to fix your Wahl clippers, so they no longer make a loud noise when in operation.
The first step towards solving the loud noise issue is to identify the source of the noise. Knowing the source will help you know the type of solution to apply. Below are some critical areas to check when trying to identify the source of the loud noise:
Contents
Blade
The blade is the first component to check when trying to identify the source of the loud noise. A damaged, misaligned, or dirty blade can make the clippers produce a loud noise. First, clean the blade using a brush or towel to remove any dirt or debris that may be causing the noise. If cleaning does not improve the noise, consider aligning the blade. To do this, first, remove the blade, clean it, and then realign it. Improper alignment can cause the clipper to make loud noise when in operation.
Motor
The motor is the central component of the clipper that powers the blade’s movement. If a motor is dirty or has worn-out brushes, it can generate a loud noise when in operation. Check the motor for any signs of wear and replace it if necessary. Similarly, if you observe that the brushes in the motor are worn-out, replace them. Doing so will smooth out the noise and reduce its level to an acceptable limit.
Clipper casing
If the blade and motor seem to be the culprits, check the clipper’s casing. A loose or broken casing can also cause a loud noise. Check and tighten all screws and bolts to ensure that the casing is tightly fixed. If you find any crack or damage in the copier casing, replace it. A damaged casing will transfer the motor’s vibration, creating a loud noise when in use.
In summary, identifying the source of the loud noise is the first step towards fixing the issue. Checking the blade, motor, and casing can help you identify the source of the noise. Once you know the source of the problem, you can apply the appropriate solution to make your Wahl clippers more user-friendly. By doing so, you’ll not only be able to use them without being annoyed but also increase their lifespan by maintaining them properly.
Cleaning and oiling the blades
One of the most common reasons behind the loud noise of Wahl clippers could be the accumulation of dirt, debris, and hair on the blades. Over time, these things can get clogged in the blades, causing friction and leading to a loud and irritating noise. Therefore, cleaning and oiling the blades regularly can help to prevent this problem from occurring.
Firstly, it is important to clean the blades before oiling them. Use a brush to remove any hair or debris that might be stuck between the blades. Make sure the clipper is unplugged before you start cleaning the blades to avoid any accidents. Then, use a damp cloth to wipe the blades clean. You can also use a mild soap solution to clean the blades if they are too dirty. However, make sure to rinse the blades thoroughly after using the soap solution and dry them with a clean cloth before oiling them.
Next, it’s time to oil the blades. Oiling the blades of Wahl clippers is crucial to maintain their performance and reduce loud noise. It is recommended that you oil the blades before and after every use and also when you notice that the blades are becoming loud. To oil the blades, you can use a Wahl Clipper Oil or any other clipper oil that is suitable for Wahl clippers. Apply a drop or two of oil between the blades and then turn on the clipper for a few seconds to allow the oil to spread evenly. Then, wipe off any excess oil with a clean cloth to avoid any messy build-up.
In addition to that, you can also use a cleaning brush to apply the oil on the blades. Dip the brush in the oil and then apply it on the blades by moving it back and forth. This will help to ensure that the blades are properly lubricated and will prevent them from getting clogged or overheated. Make sure to oil the blades evenly and apply the oil on all the moving parts of the clipper to ensure better performance.
Lastly, after cleaning and oiling the blades, it’s important to make sure that the clipper is properly assembled. Check if the blades are properly aligned and secured in place to avoid any damage or accidents. Also, ensure that there is no hair or debris left in the clipper. Proper cleaning and oiling of the blades can significantly reduce the loud noise of Wahl clippers and improve their performance, making your clipping experience comfortable and efficient.
Adjusting the tension of the blades
One of the most common reasons for Wahl clippers to make a loud noise is the tension of the blades. The blades of the clippers are tightly held together by screws, and if these screws are too tight or too loose, your clippers may start making a loud noise. To fix this issue, you need to adjust the tension of the blades.
The tension adjustment process can be a bit tricky, but it is not complicated with the right guidance. The first thing you need to do is to ensure that the clippers are turned off and unplugged from the power source before you begin. Then, remove the blades from the clipper and clean them properly. After cleaning, you need to adjust the tension of the blades. You can do this by loosening or tightening the screws that hold the blades together.
To loosen the screws, use a screwdriver and turn the screws counterclockwise. To tighten the screws, turn them clockwise. However, note that to get the perfect tension, you need to be careful and adjust the screws bit by bit until you get it right. Be aware and do not make sudden changes to the screw as this can damage the blades.
Once you have adjusted the screws to the right tension, reattach the blades onto the clipper. Turn on the clippers to see whether the loud noise is still present. If the clipper sounds quiet and smooth, then you have successfully adjusted the tension of the blades.
It is important to note that if you cannot get the tension right, you may need to replace the blades entirely. In some cases, the screws may be damaged, and it is advisable to take the clippers to an expert for proper repair.
Apart from adjusting the tension of the blades, there are a few other tips you can implement to keep your Wahl clippers quiet. First, oil your blades regularly. Oiling helps the blades move smoothly and reduces friction that may cause the loud noise. Secondly, to avoid putting too much strain on the clippers, do not cut hair too quickly. Slowly trim the hair, and if there are any tangles, work them out gently to avoid putting a lot of pressure on the clippers. This will also help in avoiding overheating the motor.
In conclusion, adjusting the tension of the blades can significantly help in fixing Wahl clippers’ loud noise issue. However, to get it right, you need to be careful and take your time when adjusting the screws. Remember to follow the manufacturer’s guidelines on the tension level and seek professional help if you are unsure of any step. Additionally, remember to oil the blades regularly and cut hair slowly to keep the clippers quiet.
Replacing Worn or Damaged Parts
One of the main reasons why your Wahl clippers might be making a loud noise is because the blades are damaged or worn out. Replacing the blades can help reduce the noise and improve the overall performance of your clippers. Follow these steps on how to replace the blades:
1. Turn off the clippers and unplug them from the power source.
2. Remove the blade by pressing the blade release button and sliding the blade off the clippers.
3. Clean the area where the blade is attached and remove any hair or debris.
4. Attach the new blade by sliding it onto the clippers until it snaps into place.
5. Turn on the clippers and test them to see if the loud noise has been reduced.
It is recommended to replace the blades every 6-8 weeks or depending on your usage to ensure the best performance and prevent excessive noise. You can purchase replacement blades at your local beauty supply store or online.
If the loud noise continues even after replacing the blades, the motor may be the culprit. Over time, the motor can become worn out, causing excessive noise and reduced performance. Replacing the motor requires some technical experience, so if you’re not comfortable with it, it’s best to take your clippers to a professional for servicing.
However, if you’re comfortable with the process, follow these steps to replace the motor:
1. Turn off the clippers and unplug them from the power source.
2. Remove the screws that secure the outer casing of the clippers.
3. Gently remove the casing to expose the motor.
4. Remove the screws that hold the motor in place and carefully disconnect the wiring.
5. Replace the old motor with a new one by connecting the wiring and securing it with the screws.
6. Reattach the outer casing with the screws and plug in the clippers to test the new motor.
Replacing a motor can be challenging, so it’s important to follow the instructions carefully. It’s also recommended to purchase a motor that’s compatible with your clippers to avoid any further issues.
Another reason why your Wahl clippers might be making a loud noise is because the battery is old or damaged. Replacing the battery can help improve the overall performance of your clippers and reduce noise.
Follow these steps to replace the battery:
1. Turn off the clippers and unplug them from the power source.
2. Remove the screws that secure the outer casing of the clippers.
3. Gently remove the casing to expose the battery.
4. Disconnect the wiring that connects the battery to the clippers.
5. Remove the old battery and replace it with a new one by connecting the wiring.
6. Reattach the outer casing with the screws and plug in the clippers to test the new battery.
Replacing the battery is a straightforward process, but it’s important to purchase a battery that’s compatible with your clippers.
Lastly, the springs that hold the blades in place can also cause loud noise if they’re worn out or damaged. Replacing the springs can improve the performance and reduce noise.
Follow these steps to replace the springs:
1. Turn off the clippers and unplug them from the power source.
2. Remove the screws that secure the outer casing of the clippers.
3. Gently remove the casing to expose the blade assembly.
4. Remove the blades and then the old springs.
5. Replace the old springs with new ones.
6. Reattach the blades and then the outer casing with the screws.
7. Plug in the clippers and test them to see if the noise has been reduced.
Replacing the springs should be done every 6-8 weeks, depending on your usage, to ensure optimal performance and noise reduction.
In conclusion, Wahl clippers can be noisy due to various reasons. However, replacing worn or damaged parts such as blades, motor, battery and springs can help reduce the noise and improve the overall performance of your clippers. If you’re uncomfortable with replacing parts, take your clippers to a professional for servicing.
Seeking Professional Repair Services
If your wah clippers are making loud noise, seeking professional repair services can be a great solution to fix the problem. While many people may try to fix their clippers on their own, it’s always best to leave the job to professionals who have the necessary expertise and experience in handling such issues. Here are some reasons why you should consider seeking professional repair services:
Expertise and Experience
Professional repair services are provided by people who have high levels of expertise and experience with clippers. These individuals have handled various clippers before, and they know all the dynamics involved in fixing different types of clippers. Therefore, they can help diagnose the problem and recommend the best solution or course of action for your clippers.
Quality Repairs
When you take your clippers to a professional repair service, you are sure to get quality repairs. The professional repair services ensure that the specific problem is fixed appropriately without causing any other issues. Additionally, they only use genuine replacement parts that will enhance the durability of your clippers.
Cost-Effective
While professional repair services may not be the cheapest option when repairing your clippers, they are cost-effective in the long run. If you attempt to fix your clippers, you may cause further damage that could cost you more in repair costs. However, seeking professional repair services ensures that the job is done right the first time, and your clippers will serve you for a long time without the need for frequent repairs.
Limited Downtime
If you’re a professional barber or use your clippers frequently, you cannot afford to have your clippers out of commission for long. Professional repair services provide quick repairs, limited downtime, and ensure that your clippers are available for use in a short period. This allows you to use your clippers with the confidence that they are working efficiently and effectively.
Warranty and Support
If the professionals repair your clippers, you can expect quality work and satisfaction. They provide a warranty or guarantee to cover any future repairs or issues that may arise. Additionally, they offer customer support to answer any questions you may have and provide maintenance advice to ensure that your clippers are working as intended.
In conclusion, seeking professional repair services to fix your Wahl clippers’ loud noise is an excellent option. Professionals have the necessary expertise, experience, and tools to ensure that your clippers are working efficiently and effectively. Furthermore, they provide quality repairs, guarantee, and support to ensure that you are satisfied with their services. With the above benefits, you can rest assured that your clippers will continue to serve you for a long time without the need for frequent repairs.