How to Fix SkyBell Flashing Orange

Understanding SkyBell Orange Flashing Light

SkyBell Orange Flashing Light

If you are a SkyBell user, you may have noticed your device flashing an orange light. Although it may be unsettling to see a flashing orange light, there is usually a reason behind it. In this article, we will discuss some of the reasons why SkyBell may flash an orange light and what you can do to fix it.

Main Reasons Behind SkyBell Flashing Orange Light

Before we dive into the solutions to fix SkyBell flashing orange light, let us identify the potential reasons behind this issue. There are mainly four reasons:

  • No Internet Connection: The first reason your SkyBell device is flashing an orange light may be because it is not connected to the internet. Without an internet connection, SkyBell cannot communicate with your phone or other connected devices. To check if your SkyBell is connected to the internet, try accessing it from your phone or the SkyBell app. If you can’t access it, then there is probably an issue with your internet connection.
  • Low Power: The second reason your SkyBell device may flash an orange light is due to low power. Low power is a result of a low battery level or an insufficient power supply. If you suspect this is the issue, simply charge the battery or connect the SkyBell to a more powerful power source, like a different outlet or through a directly connected USB cable.
  • Hardware Issues: The third reason your SkyBell may flash an orange light due to hardware issues. Perhaps, there is a component inside the device that is not functioning correctly. If this is the case, the solution would be to replace the component or to get a new one.
  • Communication Issues: The fourth reason your SkyBell may flash an orange light is due to communication issues with the skybell app. It could be that the SkyBell app is not up-to-date, or there could be a problem with the phone’s connected to the device. This issue can be fixed by updating the SkyBell app or restarting your phone.

What You Can Do To Fix SkyBell Flashing Orange Light

Now that you know the potential reasons for SkyBell flashing orange light, let’s look at the solutions to fix them:

Connect to the Internet

If you cannot connect to the SkyBell through your phone or through the SkyBell app, then the problem may be that your device is not connected to the internet. To fix this, first, check if your Wi-Fi is working correctly. Alternatively, restart your SkyBell and try to reset it by holding the button on the device for 20-30 seconds. This should initiate a reset, and your SkyBell should connect to the Wi-Fi.

Recharge the Battery

If you notice that the orange flashing light on your SkyBell is due to low power, then recharge the battery and try again. If you leave it plugged in for a while, your SkyBell should be charged enough to function correctly.

Replace the Hardware Component

If the problem is due to malfunctioning hardware, then you may need to have a hardware component replaced. This is especially true if your doorbell has undergone damage due to harsh weather or other external factors. You may want to call a technician or customer service to get it repaired or replaced.

Update the SkyBell App or Restart Phone

If the problem is due to communication errors related to the app, the solution may be as simple as updating the app or restarting your phone. Check if there are any available updates for the SkyBell app. Alternatively, force-quit the app or restart your phone. This should solve communication issues, and the SkyBell orange flashing light should stop.

In conclusion, seeing a flashing orange light on your SkyBell may be worrying, but it is usually an easy fix. The reasons can range from low battery to communication errors, but by following some simple troubleshooting methods, you can have your doorbell functioning correctly in no time.

Common Reasons for SkyBell Orange Flashing Light

SkyBell orange flashing

The SkyBell is a smart doorbell that allows homeowners to see and speak with visitors through an app on their mobile devices. It has gained popularity due to its advanced features, making it a top choice for people who want to maintain home security. However, some users of this smart device encounter an issue where the SkyBell LED light flashes orange, which can be an inconvenience. There are several reasons for this blinking light and ways to fix it.

The SkyBell is Updating

SkyBell orange flashing firmware update

If you notice that the LED light on your SkyBell is flashing orange, it may mean that the device is updating its firmware. The firmware is a type of software that controls the device’s hardware, and updating it can provide bug fixes, security fixes, and new features. During the update, you will not be able to use the SkyBell, and it’s recommended to wait until it is complete to prevent any errors.

It’s important to note that the SkyBell will automatically enter firmware update mode whenever a new update is available. The device must be connected to a Wi-Fi network for the update to start automatically. If the firmware update takes longer than expected, you may try restarting the device, which should speed up the update process. However, do not unplug the device while it is updating as this can cause irreversible damage to the device.

No Wi-Fi Connection

SkyBell orange flashing no wifi

If your SkyBell flashing orange, it might indicate a Wi-Fi connection issue. Your SkyBell needs to be connected to a Wi-Fi network to function properly. When the device is not connected to Wi-Fi, it goes into offline mode, and the LED flashes orange, indicating that it is unable to connect to the internet.

To fix this issue, make sure that the SkyBell is connected to a Wi-Fi network. You can do this by checking your smartphone’s Wi-Fi settings and looking for the SkyBell network. If the SkyBell is connected and the Wi-Fi is strong, try restarting the device. Restarting the device often resolves Wi-Fi connection issues.

Low Battery

SkyBell orange flashing low battery

If the SkyBell LED light is flashing orange, it may mean that the battery level of the device is low. When the battery level is low, the SkyBell goes into battery-saving mode, and the LED flashes orange. A low battery life could be a result of regular use, which naturally discharges the battery over time.

To fix this issue, the first step should be to charge the device using the USB adapter that came with the SkyBell. The device should be charged until it reaches a full charge, indicated by the LED light turning solid green. If the battery is still low after charging the device, it may mean that the battery needs to be replaced. You can purchase a replacement battery from the manufacturer or their authorized dealers. It’s important to note that the SkyBell is designed to last for about three to six months on a single charge.

Obstruction of the Camera Lens

SkyBell orange flashing obstruction of the camera lens

The SkyBell camera’s lens can become obstructed by debris or other materials, making it difficult for the device to record or send the feed to the app. When the camera lens is obstructed, the LED light on the device starts flashing orange, indicating that there is a problem.

To fix this issue, remove any debris or blockage from the camera’s lens. This can be done by cleaning the lens using a dry cloth or by blowing off any dust and dirt that might have accumulated. If the obstruction is severe, you may need to disassemble the device and clean the lens. Doing this may require special tools or professional assistance.

The SkyBell flashing orange is not an uncommon problem when using this smart device. The problem is fixable, and we’ve highlighted various ways to get your SkyBell working correctly. If all else fails, reach out to Skybell’s customer support or a professional installer for assistance.

How to Troubleshoot SkyBell Orange Flashing Light

SkyBell Orange Flashing Light

SkyBell is a popular brand of smart doorbells that has gained a lot of popularity due to its cutting-edge features. One of its features includes the flashing colors that come up on the device, signaling that there’s a notification available. It usually flashes blue to indicate that it’s working correctly, green to signify that the doorbell is ringing, and red to indicate low battery. However, there might be times when your SkyBell starts flashing orange for no apparent reason. If that happens, don’t worry, we’ve got you covered. Here’s a step-by-step guide on how to troubleshoot SkyBell orange flashing light.

Step 1: Power Cycle your SkyBell

Power Cycle SkyBell

The first step to troubleshooting your SkyBell orange flashing light is to power cycle the device. To do that; remove your SkyBell from its bracket or mounting plate and disconnect it from the power source. Then, give it a few seconds before powering it back on. Once you’ve finished reassembling the device, check if it still flashes orange. If it does, proceed to step two.

Step 2: Reset your Wi-Fi

Reset WIFI

The second step is to reset your Wi-Fi, as a weak Wi-Fi connection can also lead to your SkyBell flashing orange. To reset your Wi-Fi, power off your SkyBell and then turn off your Wi-Fi router or access point. After a minute or two, turn back on the access point or router and power the SkyBell back on. Once the SkyBell reconnects to the Wi-Fi, check and see if it still flashes orange.

Step 3: Check for Firmware Updates

firmware updates

If the previous steps didn’t work, it’s time to check for firmware updates. Sometimes an outdated firmware could be the reason for the orange flashing light. SkyBell releases firmware updates regularly that users can download to fix bugs and add new features. To check and see if there’s an update available, Open the SkyBell app, Go to settings and scroll down to software update, where you’ll see the current firmware version of your SkyBell. If there’s a new update available, download and install it. Then see if the flashing orange light is still there. If it is, proceed to the next step.

Step 4: Contact SkyBell Support

contact support

The final step is to contact SkyBell Support. If none of the above steps fixed the issue, it’s likely the problem is with the device itself, and you’ll need to contact SkyBell support. They’ll provide you with the necessary steps to resolve the issue, whether that entails replacing the unit or troubleshooting it further.

In conclusion, SkyBell orange flashing light might seem like an ominous sign, but it’s often a simple issue you can fix in a few minutes. Before contacting support, try the above steps, and if all else fails, SkyBell support is always available to help. With these steps, you can troubleshoot your SkyBell with ease, and restore it to its normal functionality.

Resetting SkyBell to Fix Orange Flashing Light

Resetting SkyBell

If you are experiencing an orange flashing light on your SkyBell device, this indicates there may be an issue with the device’s connection. In some cases, resetting the device can help fix this issue. Here’s how to reset your SkyBell:

Step 1: Locate the SkyBell device in your home. It should be attached to your door or doorframe.

Step 2: Press and hold the SkyBell button for at least 30 seconds. The button is located on the front of the device and may have a small light on it.

Step 3: Release the button. The SkyBell will flash blue and red to indicate that it has reset.

Step 4: Wait for the SkyBell to restart. This may take a few minutes. You will know the device has restarted when the light on the button turns green.

Other Troubleshooting Tips

SkyBell Troubleshoot

If resetting your SkyBell does not fix the orange flashing light issue, try these other troubleshooting tips:

Check your Wi-Fi connection: Make sure your SkyBell is connected to your Wi-Fi network. Check your router to ensure it is working properly.

Move your router closer: If your SkyBell is far from your router, it may have trouble connecting. Try moving your router closer to the device.

Restart your router: Sometimes, restarting your router can help resolve issues with your Wi-Fi connection.

Check for firmware updates: SkyBell regularly releases firmware updates to improve the performance of its devices. Check for updates in the SkyBell app or online.

Contact SkyBell Support

SkyBell Support

If you have tried resetting your SkyBell and troubleshooting any Wi-Fi connection issues, and you are still experiencing an orange flashing light, contact SkyBell support.

You can reach SkyBell support through their website or app. They offer a variety of resources to help you fix issues with your device, including a knowledgebase and community forum.

If your SkyBell is still under warranty, and you are unable to fix the issue, SkyBell may be able to repair or replace your device.

By following these steps, you should be able to fix the orange flashing light issue on your SkyBell device. Whether you need to reset your device, troubleshoot your Wi-Fi connection, or contact support, there are a variety of resources available to help you get your device working properly.

When to Seek Professional Help for SkyBell Orange Flashing Light

SkyBell Orange Flashing Light

When you encounter problems with your SkyBell, it can be a frustrating experience. One of the most common problems you may encounter with your SkyBell is the orange flashing light. This light indicates that there is an issue with your device, and it needs to be resolved.

While there are several steps you can take to troubleshoot the problem on your own, there may come a time when you need to seek professional help. Here are some situations where you should consider getting help from an expert:

1. You have tried all the troubleshooting steps and the problem persists

SkyBell Orange Flashing Light Troubleshooting

If you have followed all the troubleshooting steps recommended by SkyBell’s support team and the issue still persists, it’s time to seek professional help. A trained technician will be able to diagnose and solve the issue more effectively than you can on your own.

Trying to fix the problem on your own beyond this point may cause further damage to your SkyBell or could make it more difficult to repair. It is best to seek help immediately before the issue becomes irreparable.

2. You are not comfortable with technical and electronic devices

SkyBell Installation

If you are not comfortable with electronic or technical devices, you may not want to risk causing further damage to your SkyBell. In such a scenario, it is best to seek professional help.

A specialist will help you understand what went wrong with your device in simple terms, and most importantly, will take care of the problem for you. Professional help provides a quick and safe solution and gives you peace of mind knowing that everything is in proper order.

3. The problem is beyond your scope of expertise

SkyBell Technician

If you have attempted to fix the issue on your own, and the problem still persists, it’s time to accept that the problem is beyond your scope of expertise. Even if you are tech-savvy, some things still require the hands-on expertise of a SkyBell technician.

Attempting to fix the problem yourself may worsen the issue and make it more difficult and more expensive to resolve. It is always better to get help from experts when you need it.

4. Your SkyBell is still under warranty

SkyBell Logo

If your SkyBell is still under warranty, it is best to seek professional help from the manufacturer. Attempting to fix the device on your own can void your warranty, making it more expensive to repair or even leading to the loss of warranty.

By getting help from the manufacturer or an authorized technician, you can ensure that your warranty remains intact, and you get quality service from the people who know your device inside out.

5. There are physical damages to the device

Broken SkyBell

If your SkyBell device has suffered physical damage or has been dropped, it is best to seek professional help. When there are physical damages to the device, it is often challenging to troubleshoot the problem on your own. In addition, attempting to fix physically damaged devices without technical expertise poses a risk of further damage to components, making it more expensive to repair or even leading to the loss of device.

Getting professional help ensures that your SkyBell device is repaired to its optimal level and adequately functioning, thus providing reliable service to you and the people who visit your home.

In conclusion, getting professional help when you encounter problems with your SkyBell device is essential. It guarantees your safety, prevents further damage to your device, and saves you the time and energy of figuring out the problem on your own. Besides, authorized help from a reputable company ensures that you get quality service and preserves your device warranty.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top